Results 1 to 9 of 9
  1. #1
    Join Date
    Oct 2006
    Location
    Melbourne
    Posts
    0

    Default Hot water heater recommendations please

    Our hot water heater died last night. It was a fourteen year-old 135 litre gas Rheem. What's a realistic figure for replacement of like with like? So far I've had quotes varying by almost $1,000 for the same unit!

    Should I replace it with a similar unit? We should be moving shortly, so that would presumably rule out solar or other more expensive systems.
    .
    I know you believe you understand what you think I wrote, but I'm not sure you realize that what you just read is not what I meant.


    Regards, Woodwould.

  2. #2
    Join Date
    Apr 2008
    Location
    Pacific Haven QLD
    Age
    80
    Posts
    0

    Default

    WW.....Had the same problem last year....replaced with an Edwards SS solar where the panels are on the roof but the tank is on the ground. I would highly recommend it, one of the better features is the booster elements only heat the top one third of the tank...thereby saving a lot of power not trying to heat the whole 325ltrs.

    As to moving...would be a very potent selling point. From memory paid around $4000 for it and got $2000 plus back in rebates.
    Cheers...........John M

  3. #3
    Join Date
    Nov 2007
    Location
    belgrave
    Age
    61
    Posts
    0

    Default

    We did the solar thing recently too. But if you are moving maybe it would be better save that for the new place, where YOU can get the benefit of the lower bills. (You only get ONE grant. ) We had a "Heat pump" one cos we are in the hills so not enough sun for enough of the year. Hear pumps somehow use the heat differential of the air to heat the water. Kinda like a frig in reverse.
    anne-maria.
    T
    ea Lady

    (White with none)
    Follow my little workshop/gallery on facebook. things of clay and wood.

  4. #4
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    93

    Default

    We have one of those heat pump jobbies - Quantum. Looks like a normal water heater with a fan unit sitting on top.

    Works like a fridge in reverse, i.e extracting heat from the air and applying it to heat water. Even in a relatively cool climate it is very efficient - we have found the claims to use about 30% of the power of a conventional electric system to be about right.

    We didn't have the choice of a gas heater here (no town gas), and solar on the roof wouldn't work well in winter for us, so the air heat pump water heater has worked out well.

  5. #5
    Join Date
    Jan 2008
    Location
    Blue Mountains
    Age
    61
    Posts
    0

    Default

    G'day Woodwould,

    If you are definitely moving, replace like with like. These units are relatively cheap.

    Changing like with like makes it an easy install, 2 hours maximum.

    These days plumbers are required to fit a tempering valve which will limit delivery temp. to 50 degrees max. Some plumbers still fit heaters without this valve, which may account for some price discrepancy.

    My guess isvery rough)

    Callout charge..........................$150.00

    Labour-4hrs @$150.00..............$600.00

    Tempering valve........................$100.00

    Pipe and fittings..........................$75.00

    TOTAL...................................$925.00 plus cost of heater of course.

    If they relace the control valve(on/off) that's another $30.00

    And if you have high water pressure they may need to fit/replace the pressure limiting valve which costs around $80.00

    So anything around the $1,000.00 mark seems possible, and a good plumber could certainly do it for less. But anything well over that and I'd be lookig elsewhere.

    BTW I ran a plumbing business for 20 years and now teach at TAFE.

    Good luck.
    The time we enjoy wasting is not wasted time.

  6. #6
    Join Date
    Nov 2007
    Location
    Mt Crosby, Brisbane
    Posts
    316

    Default

    Assuming they are still in business I would recommend saxon for conventional water heaters. They are queensland made all copper and seem to last forever.

    The rheem have an anode in them which rots after about 5 years, then the tanks starts and after about 10 years the thing leaks and fails.

    The saxon system is different. It has a non pressurised copper tanks with 2 coils. The heating coil heats the reserviour and the pressurised water goes through teh other coil and picks up heat as it goes. This has a number is important advantages.

    The water comming out of your tap, after the first few liters, hasn't been sitting in the tank for ever.

    The only part under mains pressure is the coil of pipe.

    Mine was in my house 15 years ago when I bought and still going strong. Oddly they are often CHEAPER then the pig awful rheem systems. Maybe because they don't buy TV ads....

    2c
    I'm just a startled bunny in the headlights of life. L.J. Young.
    We live in a free country. We have freedom of choice. You can choose to agree with me, or you can choose to be wrong.
    Wait! No one told you your government was a sitcom?

  7. #7
    Join Date
    Oct 2006
    Location
    Melbourne
    Posts
    0

    Default

    Thanks for the advice chaps. The new AquaMAX is in and running – and all for $1,100.
    .
    I know you believe you understand what you think I wrote, but I'm not sure you realize that what you just read is not what I meant.


    Regards, Woodwould.

  8. #8
    Join Date
    Nov 2007
    Location
    belgrave
    Age
    61
    Posts
    0

    Default

    Quote Originally Posted by Woodwould View Post
    Thanks for the advice chaps. The new AquaMAX is in and running – and all for $1,100.
    Cool ........ I mean HOT!.

    anne-maria.
    T
    ea Lady

    (White with none)
    Follow my little workshop/gallery on facebook. things of clay and wood.

  9. #9
    Join Date
    Mar 2008
    Location
    Lambton, Newcastle, NSW, Australia
    Posts
    1

    Default

    Must be the season for it, ours died on the Sunday of the long weekend. It was a gas storage heater but I picked up a second hand near new instantanious Rennai off ebay for $150 (usualy about $1200) and put it in on the Tuesday. Other than doing it in the pouring rain it all went well. Got to keep some money to spend at the woodshow
    Instagram: mark_aylward
    www.solidwoodfurniture.com.au


    A good edge takes a little sweat!!

Similar Threads

  1. Replacing an in roof water heater with an outside one
    By Reno RSS Feed in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 0
    Last Post: 25th February 2009, 09:20 PM
  2. Supporting electric water heater
    By stuey in forum HEATING & COOLING
    Replies: 3
    Last Post: 13th January 2008, 10:54 PM
  3. Rhemglas 101 Water heater help!
    By fixa24 in forum HEATING & COOLING
    Replies: 6
    Last Post: 23rd March 2006, 09:44 PM
  4. Electric water heater
    By lnt9000 in forum HEATING & COOLING
    Replies: 8
    Last Post: 27th February 2006, 10:57 PM
  5. Help, Bosch Water Heater
    By cbat58 in forum HEATING & COOLING
    Replies: 11
    Last Post: 13th June 2005, 04:33 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •