Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2011
    Location
    Ballarat, Victoria
    Posts
    0

    Default Finish Recommendations

    Hi all, I have been working on some relief carving in MDF and I am wondering what is a good finish for MDF. The carvings I have created I have stained with a mixture of Acrylic paint and linseed oil mixed together. I'm not sure if that will affect the selected finish. I was thinking shellac might be good, but, as I am new to finishing I'm not sure. Any help would be greatly appreciated.

    I have attached a couple of images - the size of the wall plaques are 280mm diameter

  2. #2
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    I am guessing a little here but sealing the MDF would be my intention. So something that will not soak into the MDF and not water based. That been said a poly or two part epoxy. Maybe others have a better understanding.

Similar Threads

  1. Any Recommendations for new DGH
    By cathymac1 in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 2
    Last Post: 9th April 2008, 02:05 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •