Results 1 to 6 of 6
  1. #1
    Join Date
    Jun 2011
    Location
    sydney
    Posts
    2

    Default Gday from Sydney

    Thanks for the forum everyone.

    What brings me here is a project that I am working on... At the moment I am still at the planning/designing stage.

    I want to build a CNC machine for milling wood and foam, which will have a couple of very important parts (the gantry risers) CNC cut of MRMDF. I chose to make the machine with a couple of wooden parts as it should allow for an easy assembly, and low cost.

    I would like to post a .dxf drawing of the profiles and debate about the Machining of MDF, where would be the best place for that? I am also possibly looking for a company to perform these cuts for me.

    Regards,
    Etnod

  2. #2
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Welcome to the forum. You can post specific questions about CNC Machines on this sub forum.

    CNC Machines - Woodwork Forums or a maybe do a Work in Progress(WIP)

    And with general questions in the other sub forums.

  3. #3
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    0

    Default

    Welcome Etnod Christos has pointed you in the right direction but neglected to mention this weekends up and coming wood show at Fox studio where I believe a CNC machine will be on display. You might like to visit and check it out.

  4. #4
    Join Date
    Mar 2007
    Location
    Munruben, Qld
    Age
    84
    Posts
    0

    Default

    Welcome aboard.
    Reality is no background music.
    Cheers John

  5. #5
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    1,889

    Default

    Welcome

  6. #6
    Join Date
    Jun 2011
    Location
    sydney
    Posts
    2

    Default

    Thanks everyone!

Similar Threads

  1. Gday
    By Doerner in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 3
    Last Post: 20th March 2011, 09:01 PM
  2. Gday from Beaumont Hills, Sydney
    By emailwedgy in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 6
    Last Post: 31st May 2010, 09:47 AM
  3. gday all
    By simmoi in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 3
    Last Post: 4th September 2009, 12:03 PM
  4. GDAY GDAY From The Goldie .......
    By eman in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 3
    Last Post: 29th November 2008, 01:10 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •