Page 2 of 2 FirstFirst 12
Results 16 to 27 of 27

Thread: Moving house!

  1. #16
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    0

    Default

    Quote Originally Posted by snowyskiesau View Post
    The removalist arrives tomorrow night to pick p the heavy stuff including the washing machine.
    The washing machine had transit scews/plug installed during delivery. How important is it that these go back in before the machine is moved?

    I never got these as the installation was done by the delivery guys and the took them along with all the packing etc.

    Geoff it stabilises everything we always make sure its well drained even undoing and laying hose flat to the ground. Also putting a few towels into and taping around the top edge if its a tub type. It stops the tub from banging around putting strain on the lower mounting. The basin can be used for laundary gear its additional storage area makes it easy to find when you need it.

  2. #17
    Join Date
    Jul 2006
    Location
    Port Huon
    Posts
    373

    Default

    Thanks Ray,
    Machine is a front loader. I found the manual (don't actually read these things but I never throw them away ...) and it describes the transit lock removal.
    I managed to get a piece of threaded rod with the same (pr close enough) thread on it and a nut, a washer and a pair of pliers has seen the drum tightly locked down.

    [I only used pliers as my spanners are all packed in a box, somewhere...]

  3. #18
    Join Date
    Jul 2006
    Location
    Port Huon
    Posts
    373

    Default Tomorrow's the day!

    It was going to today but I'm just too knackered from loading the van and cleaning the house.
    I leave bright and early tomorrow to start an new life in Tasmania. Catching the ferry Monday night

    Said goodbye to the landlord and his wife today, after 22 years, it was almost like saying goodbye to family.

    I have a nice house to look at when I get to Hobart (renting) - 2 garages with parking for 3 cars, not room for the van though.
    Im already booked on a woodworking course, greenwood Timber Furniture making with the Living Boat trust

    Regards
    Geoff

  4. #19
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    0

    Default

    Geoff good luck and don't forget to write

  5. #20
    Join Date
    Nov 2006
    Location
    Bendigo Victoria
    Age
    80
    Posts
    4,565

    Default

    Geoff, it was good to catch up with you in Sydney.

    Wishing you all the best for your new life in Tassie, hope it all works out for you

  6. #21
    Join Date
    Feb 2008
    Location
    Deloraine Tasmania
    Age
    59
    Posts
    0

    Default

    Good luck with the trip mate.

  7. #22
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    0

    Default

    Quote Originally Posted by Big Shed View Post
    Geoff, it was good to catch up with you in Sydney.

    Wishing you all the best for your new life in Tassie, hope it all works out for you
    Yeh heard about that, sneaky visit Fred (Thats where SWWS should be held).

  8. #23
    Join Date
    Jul 2006
    Location
    Port Huon
    Posts
    373

    Default Getting Settled

    I've only been down here two weeks and I'm and missing my tools already!

    Next week I take up a house sitting gig for 3 months. Beautiful place south of Cygnet, big bush block on the water, no nearby neighbours. It even has a big shed but the shed has no power so the tools will have to live in storage for a bit longer

    Perhaps I could learn to use none powered tools, do they make those?

  9. #24
    Join Date
    Mar 2005
    Location
    In the shed, Melbourne
    Age
    53
    Posts
    0

    Default

    Quote Originally Posted by snowyskiesau View Post

    Perhaps I could learn to use none powered tools, do they make those?
    There is always the noise when you curse and swear because you've stuffed something up, powered or not.
    I make things, I just take a long time.

    www.brandhouse.net.au

  10. #25
    Join Date
    Jul 2006
    Location
    Port Huon
    Posts
    373

    Default

    Another week without a workshop and nothing but this view to look at.
    Looks like I'll have to make a trip before the weekend to get some tools. Too much trouble to set up the lathe only to have to move it again in a couple of months but there's enough room for the mill and that's not a major hassle to set up. Plus the Triton and the woodworking tools and the power tools...

  11. #26
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    0

    Default

    You poor fellow thats all there is to keep you occupied a view.............no fishing line?..no wood...........no parcel arrived yet?

  12. #27
    Join Date
    Jul 2006
    Location
    Port Huon
    Posts
    373

    Default

    Tried fishing yesterday but only managed to lose a couple of lures. I must find out from the locals just what to fish for and the best setup. There is a fish farm in the next bay so escaped salmon might be the go.
    Lots of wood here but all for burning. Got to keep the fire going 24/7 for both comfort and hot water.

    As I gave away or sold all of my furniture before leaving Sydney, I think the next wood working project should be to make the things I'm going to need when I do get a place.
    Bed, chest of drawers, coffee table, sideboard etc. Looking for suitable (i.e. simple) plans now. I'll ask about timber availability next time I'm down at the boatshed.

    No parcel yet. Not that I have the tools to install it anyway

Similar Threads

  1. Moving House
    By echnidna in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 13
    Last Post: 8th June 2005, 08:50 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •