![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 11 of 11
Thread: frustrated shopsmith Mk V owner
-
26th May 2011, 12:17 PM #1
New Member
- Join Date
- May 2011
- Location
- Lower Towamba NSW
- Posts
- 3
frustrated shopsmith Mk V owner
G'Day
Just joined and amazed at the number and variety of posts. Have inherited (now some time ago,) a Shopsmith which has given good service..until now. I guess like me its a bit over the hill; its got tired and needs attention. I have been trying to get a replacement speed control handle as the alloy gear has stripped and speed can no longer be adjusted. Shopsmith in the USA have informed me that it no longer ships parts outside the USA and I believe that there is no agent in Australia for this machine. Is there anyone with information as to where I might get the part?
I live in south eastern NSW and wonder if there is any repair shop in the region known to pull these machiines apart and repair them.?
Cheers Fred
-
26th May 2011, 01:29 PM #2
Look up the threads about buying/shipping stuff from the USA.
There are a couple of places that will buy stuff for you & have it shipped to you for a fee.
Places like Shop USA & Price USACliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
26th May 2011, 08:26 PM #3
As a fellow Shopsmith owner that is fairly poor form from Shopsmith, particularly when they haven't had an Australian distributer for some time. I would have guessed the number of Shopsmith owners seeking spares would be relatively low and it could almost be just a good will thing to deliver outside the USA.
I would try Ebay both Australia and USA. Not many pop up in Australia but there are often parts on the USA Ebay. Or do as Cliff said and look at a freight forwarder.
Before internet orders were a big thing I got some replacement parts engineered for mine but it was costly but at least they were good enough to do such a small job.Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.
-
26th May 2011, 08:30 PM #4
Or try:
Shop Smith, all in 1 tool, wood lathe, jig saw, sander, | eBay
Not great condition by the look of it but it should stop it going too high and will be great for your spare parts. Bit of a drive perhaps but perhaps still cheaper than trying to get your parts from the States.Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.
-
27th May 2011, 04:22 PM #5
New Member
- Join Date
- May 2011
- Location
- Lower Towamba NSW
- Posts
- 3
Frustrated shopsmith owner not so frustrated now.
G'day guys
Many thanks for suggestions. Likely to follow up eBay offer in first instance.
Fred
-
27th May 2011, 09:14 PM #6
Welcome to the forum.
-
28th May 2011, 04:10 PM #7
Fred
If all else fails I might be able to mill up a new one up for you I like doing a project that is really useful. Let me know if you are interested. No cost for my time
Russellvapourforge.com
-
30th May 2011, 04:28 PM #8
New Member
- Join Date
- May 2011
- Location
- Lower Towamba NSW
- Posts
- 3
frustrated Mark V owner
G'day Russell. Happy to meet you.
Many thanks for your offer. May have to keep you to that.
Cheers
Fred
-
3rd June 2011, 09:20 PM #9
No problem (yet)
Can you put up so photos
Russellvapourforge.com
-
27th October 2011, 10:29 AM #10
Intermediate Member
- Join Date
- Oct 2011
- Location
- western australia
- Posts
- 1
Join the club
Gooday Fred!
have inherited a Mark 5 and am currently looking for parts. You can purchase parts from a number of sources apart from the company.
ebay works well as does restorers in the US. have found that the video clips online at shopsmith are also very good. i have the original manuals and parts lists if you need them?
John
-
16th February 2012, 10:22 PM #11
New Member
- Join Date
- Mar 2010
- Location
- Emu Plains NSW
- Posts
- 2
Similar Threads
-
Very Angry and frustrated!!
By Christopha in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 32Last Post: 11th November 2005, 02:25 AM