Results 1 to 4 of 4
  1. #1
    Join Date
    Sep 2006
    Location
    Melbourne
    Posts
    9

    Default Bought Tassie Oak dining set - recommended products to protect finish?

    Hello,

    We just bought a Tasmanian Oak dining set. As you can see below, it has a very rough and natural looking finish. We were probably crazy to buy this for a dining table, but we just loved it.

    So, the question is, what should we use to protect the table top from food and keep it looking nice?

    The store we bought it from didn't have an specific information on the finish of it, but generically suggested using teak oil or beeswax.

    Any recommendations for specific products?

    Thanks, Dorothy







  2. #2
    Join Date
    May 1999
    Location
    Grovedale, Victoria Australia
    Age
    66
    Posts
    2

    Default

    Just to clarify is there no finish at all on the setting.

    Or does it have a finish and you just want to put another finish over this.

    If there is a finish on there generally cleaning with a damp rag is all that is needed.
    Jim Carroll
    One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
    Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!

  3. #3
    Join Date
    Sep 2006
    Location
    Melbourne
    Posts
    9

    Default

    Hi Jim,

    I think there is a finish, but it seems very "light" by its appearance. I was just wondering if I should put something else over it to protect it, since the grain is so rough.

    Thanks, Dorothy

  4. #4
    Join Date
    Sep 2006
    Location
    Melbourne
    Posts
    9

    Default No finish after all

    We've been living with this table for a month or so now, and I'm pretty sure there's no finish on it. Liquids soak in quickly and it stains easily.

    What would you suggest to finish it to withstand daily use and protect it from food stains?

Similar Threads

  1. Iron bark posts - recommended finish
    By oblivious in forum FINISHING
    Replies: 4
    Last Post: 28th July 2010, 09:59 PM
  2. Replies: 3
    Last Post: 21st March 2009, 06:56 PM
  3. Finish/Protect Jarrah External Doors
    By chromis in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 2
    Last Post: 11th March 2008, 01:43 PM
  4. Finish to shop bought pine table???
    By hawkinob in forum FINISHING
    Replies: 4
    Last Post: 26th July 2004, 11:01 PM
  5. Replies: 0
    Last Post: 31st May 2004, 08:08 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •