Results 1 to 4 of 4
  1. #1
    Join Date
    Apr 2007
    Location
    Perth
    Age
    50
    Posts
    0

    Default Wipe on Poly, how many coats?

    I have so far applied 4 coats of WOP to the coffee table that I am making, sanding 320 grit between each coat.

    2 Questions:

    1. How many coats would you need for a coffee table?

    2. How long to let it cure before I rub it out and use EEE and then WAX etc?

    Cheers

  2. #2
    Join Date
    Jun 2003
    Location
    ...
    Posts
    1,460

    Default

    On a dining table that I was restoring I gave it seven coats, only sanding between the first two coats.

    No other finish, like wax, was necessary.


    Peter.

  3. #3
    Join Date
    Dec 2004
    Location
    Toowoomba Q 4350
    Posts
    3,491

    Default

    from memory, I think wop takes about 72 hours to cure.

  4. #4
    Join Date
    Nov 2003
    Location
    Sydney
    Age
    54
    Posts
    891

    Default

    5 coats are more than enough for me. Light sand between every coat. It is a polyU finish, so don't wax or polish.

    Surface can be used overnight but leave it for a day or 2 if you want to be sure.
    Visit my website at www.myFineWoodWork.com

Similar Threads

  1. Wipe on Poly
    By har7801 in forum FINISHING
    Replies: 8
    Last Post: 27th May 2010, 03:19 AM
  2. Wipe on Poly - Where to get some
    By Fireguard in forum FINISHING
    Replies: 8
    Last Post: 16th July 2008, 03:52 PM
  3. Getting The Most Out Of Wipe-on Poly
    By DPB in forum FINISHING
    Replies: 7
    Last Post: 7th May 2006, 08:40 PM
  4. Wipe on Poly
    By Lignum in forum FINISHING
    Replies: 0
    Last Post: 26th February 2006, 06:43 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •