![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: Buffing Organoil
-
14th March 2011, 09:46 AM #1
New Member
- Join Date
- Mar 2011
- Location
- Gingin WA
- Posts
- 1
Buffing Organoil
G'day to All. I'm a new member from Gingin WA. I have a question about finishing. When using Organoils Hard Burnishing oil the last stage is to power buff with lambs wool. My buffer has a range of 600-2000 rpm. As Im not sure of the theory behind the buffing can any one suggest what speed to use?
-
28th March 2011, 09:59 PM #2
Senior Member
- Join Date
- Feb 2004
- Location
- Perth,WA
- Posts
- 6
Hi,
Try asking the manufacturer (of the oil) perhaps.
Hope it helps,
Bob H.
-
28th March 2011, 10:31 PM #3
I have used this product many times on tables and benches, the idea is to get it a bit warm so plenty of elbow grease is the go.
-
30th March 2011, 06:49 PM #4
Senior Member
- Join Date
- Sep 2008
- Location
- Hamilton, VIC
- Posts
- 0
Start with the lower speed (I know the instructions don't specify what speed to use) and if you aren't getting the result you want, speed it up a bit. I probably wouldn't go right up to 2000 rpm, the lambswool might fall apart.
Similar Threads
-
Question about Buffing Oil
By hsc07ww in forum FINISHINGReplies: 0Last Post: 24th June 2007, 04:12 PM