Results 1 to 4 of 4
Thread: Help with Shellac
-
12th March 2011, 02:27 PM #1Novice
- Join Date
- Jun 2009
- Location
- Melbourne
- Posts
- 0
Help with Shellac
G'day all...I haven't posted here before,but picked up much great advice over time,and it's been a great help in getting restarted as a furniture maker after a 20 year break.
I was hoping someone could help with a finishing problem.
I'm trying to finish a Chestnut table, which has been stained with Haymes oil based stains.
Stupidly,and this may well be the problem,i've been using a U Beaut Hard shellac that i have had stored in plastic airtight container for some weeks, which i've drawn on to finish other stuff.
From time to time, i've added an amount of ethanol depending on whether i'm doing
first or subsequent coats.
The brush sits in a tin with ethanol, and i've reused that with fine results until now.
The second coat of about 60/40 shellac,ethanol goes on fine, but the second coat
using same container but probably being around 70/30 shellac, ethanol shrivels, and
actually looks like it's trying to strip the table.
In sanding the first coat with 1200 and using 0000 steel wool, it easily cuts through
the first coat,which shows when putting on the second.
I dare say,i shouldn't be using oldish mixed solution,the brush could be cleaned after
each use, and a more consistent ratio of shellac to ethanol might help too.
so, i was wondering if anyone can confirm that i've been a goose about the whole
thing, and or if there's anything else i could work on to get it right.
Namely the correct ratio's.....for first and subsequent coats.
Aside from that......has anyone successfully used Rustins spirit stains under hard .
They reckon it's ok,but i had this problem,same table(sigh) when i used their stuff,
thinking that was the problem,imcompatible with U Beauts product, but it's happened again with the oil.
Cheers and thanks,
Polski
-
12th March 2011, 02:53 PM #2
Sultry isn't it, have a ice cold beer for the mean time, help may be coming around the corner
-
12th March 2011, 09:26 PM #3Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 74
- Posts
- 2,515
Unfortunately Neil is away at the moment.
A look here might be worthwhile. U-Beaut Polishes - HOME PAGE
-
12th March 2011, 09:49 PM #4
How frustrating for you I've hunted up some threads which you may find helpful.
Stain and Shellac
Another
and a third
I do note that you are using an oil-based stain and these threads talk about a spirit based stain, but based on what you've described is happening, these threads seem to match.
cheers
WendyBox Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
Similar Threads
-
What is blonde shellac/super blonde shellac?
By Kaisergrendel in forum FINISHINGReplies: 2Last Post: 6th April 2010, 11:17 PM -
Shellac, tell me all you know!
By kekemo in forum FINISHINGReplies: 82Last Post: 15th March 2008, 02:19 AM -
Shellac
By stephenjay in forum FINISHINGReplies: 1Last Post: 12th May 2007, 04:13 PM -
Shellac ( again)
By Shaty40 in forum FINISHINGReplies: 3Last Post: 14th November 2004, 09:15 PM
Bookmarks