![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 5 of 5
Thread: Changing arbor size
-
27th February 2011, 07:21 PM #1
Changing arbor size
I am half way there with the rebuild of the Wadkins Bursgreen 10"
One snag I have found it that there is a small lip on the arbor that pushes out any washer thingies used to change arbor size.
So my question is:
How common is a 3/4" inside with a 25mm outside washer thingy?
If I can find one I am home and hosed and usinthe saw by next weekend!
Chris
-
27th February 2011, 07:58 PM #2
-
27th February 2011, 08:31 PM #3
How did i not find that?
I sear I looked in Carbatec's bushes page, I saw just 2!
Thanks
Chris
-
28th February 2011, 07:54 PM #4
I see what my problem was.
Carbatec Launceston only stocks 2 sizes Carbatec Melbourne lots of sizes.
Guess who I will be shopping with?
-
28th February 2011, 08:04 PM #5
Or maybe not.
$15 postage for three "washer"
Ouch!