Results 1 to 13 of 13
Thread: OT Pre-paid net Access
-
3rd March 2005, 06:34 PM #1
21 with 26 years experience
- Join Date
- May 2004
- Location
- Sunshine Coast Queensland
- Age
- 54
- Posts
- 0
OT Pre-paid net Access
Anyone here know who does a good deal on pre-paid net access.
My current ISP is starting to suck big time but I can't change for about 3 months. Thinking a prepaid set up would keep me online during the down time.
Cheers
Paul
-
3rd March 2005, 07:00 PM #2
Wood Wrecker
- Join Date
- Jan 2004
- Location
- Over there a bit
- Age
- 17
- Posts
- 503
Wots this got to do with woodturning? :confused:
Boring signature time again!
-
3rd March 2005, 07:00 PM #3
evil twin of Gawd
- Join Date
- Nov 2003
- Location
- Beachport, South Oz, the best little town on the planet.
- Age
- 73
- Posts
- 776
Rack off out of the woodturning forum........ stick it where the sun don't shine.... you know.... where all things non woodworking are!
-
3rd March 2005, 07:29 PM #4
21 with 26 years experience
- Join Date
- May 2004
- Location
- Sunshine Coast Queensland
- Age
- 54
- Posts
- 0
Well Guys,
If I wanted be to smart ( which I find very easy to do) I could say that since this forum is woodwork related and you need net access to read this forum, my post is relevant.
Or I could point out that since my thread header clearly states that this post is off topic that you read at your own risk and have no grounds to complain.
Either way.........
Cheers
Paul
-
3rd March 2005, 07:34 PM #5
Wood Wrecker
- Join Date
- Jan 2004
- Location
- Over there a bit
- Age
- 17
- Posts
- 503
I'm sorry Mr stopper er Christopha, I'll just be leaving now, dragging my feet quietly, and hanging my head low, not making eye contact. I promise Sir I'll never darken the hallowed passages of this sacred area again.
Boring signature time again!
-
3rd March 2005, 08:31 PM #6
Deceased
- Join Date
- Oct 2003
- Location
- Kentucky NSW near Tamworth, Australia
- Age
- 86
- Posts
- 1,067
Try Bigblue. I used them for a while. They have both dial up and broadband on pre-pay. Available from Harvey Normans.
Originally Posted by smidsy
Go here to have a LOOK. http://www.bigblue.com.au/
-
3rd March 2005, 09:00 PM #7
21 with 26 years experience
- Join Date
- May 2004
- Location
- Sunshine Coast Queensland
- Age
- 54
- Posts
- 0
Hei Bazza,
Unfortunately Big Blue are now part of iinet which is my current useless ISP.
Cheers
Paul
-
3rd March 2005, 09:31 PM #8
evil twin of Gawd
- Join Date
- Nov 2003
- Location
- Beachport, South Oz, the best little town on the planet.
- Age
- 73
- Posts
- 776
Dunno spit about isps and stuff but the insults seem to work good!
-
3rd March 2005, 09:42 PM #9
Pancakeus Incredibulus
- Join Date
- Jun 2004
- Location
- Perth WA
- Posts
- 780
Whats the drama with iinet?. I've found them able to deal with any minor probs I've had. Mind you thats with Broadband. When I had them with dialup it sucked bigtime.
CheersSquizzy
"It is better to be ignorant and ask a stupid question than to be plain Stupid and not ask at all" {screamed by maths teacher in Year 8}
-
3rd March 2005, 10:07 PM #10
Member
- Join Date
- Jan 2005
- Location
- Vermont - Vic
- Posts
- 27
Try the address below, they have a thread on pre paid dial up at the moment.
http://forums.whirlpool.net.au/forum-threads.cfm?f=5
If the address above does not work then try this address. Choose dial up internet at the bottom of the page.
http://forums.whirlpool.net.au/
DanielMy advice is rarely any good, but is free to use at your own risk.
-
3rd March 2005, 10:13 PM #11
SENIOR MEMBER
- Join Date
- Nov 1999
- Location
- East of Melbourne.Vic. Australia
- Posts
- 126
I'm with Smidsy. He's got this in the right place "Nothing at all to do with Woodwork" Sorry Stoppers er- Christopha, Go and build a dingy(sic) or something
Jack the Lad.
-
4th March 2005, 01:49 AM #12
Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 74
- Posts
- 2,515
But it wasn't. I moved it here. Originally Posted by JackoH
-
4th March 2005, 06:54 AM #13
Retired
- Join Date
- Nov 2004
- Location
- Oz
- Posts
- 158
Maybe his lathe's got internet access so he wont miss anything on the forum while turning
Originally Posted by outback
Reply With Quote
Bookmarks