Hi All,

I haver been getting ready to put up a Stratco Outback rear awning on my house (DIY) and it seems pretty easy to do after going through their DVD 10 times.

I have to reinforce the back channel with steel brackets under the roof line. The corners of the roof I had to remove the paneling on the underside of the eaves because of the tile end capping and no movement.

Does anyone kinow how to remove the first5 gutter end line of tiles?

When I removed the paneling I saw that there were tie down bits of wire and if I take the tiles off from the top I will not be able to anchor them down.

It will only be one layer of tiles needed for me to secure the steel brackets - will it be necessary to secure the tiles on replacing or will they lock into place without securing with wire.

Any advice would be appreciated.

Regards
Paul


Read the full thread at RenovateForum.com...