Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2010
    Location
    Belgrave
    Posts
    11

    Default specks on 2 pac satin

    I know that with high gloss you can wet and dry (1200), buff it back, and get a completely unstippled finish free of those tiny dustmarks.

    Every second or third job I get back from the painters has very fine dust specks that leave a stipple finish. Not much, and passable in most jobs. But some people are finicky.

    If I need to is there a method of smoothing out satin a bit without affecting the finish too much? I put some polish on once and buffed it, but I made the finish a gloss. Wet and dry leaves swirls and fine lines. I tried 1500 with my sander but that left fine swirl marks.

    I don't need a perfect speck/stipple free surface. Just a lot better than it is.

    I have changed painters about 4 times. So I'm resigned to the fact from time to time I will get this, and occasionally the customer will arc up about it. Time is a consideration, so just sending it back to the painter is sometimes not an option.

  2. #2
    Join Date
    Sep 2004
    Location
    Melbourne
    Age
    87
    Posts
    0

    Default

    Give This Mob a go . I used to get 2 pac gloss doors from them - spot on .They have a very big/good set up and I found their prices good.
    I've just become an optimist . Iv'e made a 25 year plan -oopps I've had a few birthdays - better make that a 20 year plan

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •