![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 6 of 6
Thread: Staining end grain
-
13th December 2010, 09:18 PM #1
Staining end grain
Hi guys
I will in the near future need to stain a table top made from Qld Maple and I got to thinking the end grain will take up more stain than the rest of the top and what I can do about this to get a more evan stain colour overall, any help please I don't do staining of my work but I need to this time. I'm going to use tea as a natural stain.
SBPower corrupts, absolute power means we can run a hell of alot of power tools
-
14th December 2010, 10:12 AM #2
Staining endgrain is always a pain for this very reason, but sanding the endgrain with a higher grit can help.
You may find a few tests on some scrap worthwhile to figure out how high you need to sand the end grain. Also, using a weaker solution of tea for the end grain might work as well.
cheers
WendyBox Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
14th December 2010, 04:50 PM #3
GOLD MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Age
- 37
- Posts
- 0
I asked myself the same question a little while ago.
Here are some links that might help. I think sealing the end grain may help as well.
How to Finish End Grain — Woodsmith Tips
Staining End Grain
-
14th December 2010, 05:15 PM #4
Brush the end grain with a coat or two of diluted Shellac before you stain it, this will lighten the stain considerably but check on a scrap piece of the timber first because it may lighten too much if you do too many coats. One coat may be enough. If the this makes the end grain too light, you can darken it down by applying another coat of the stain.
Reality is no background music.
Cheers John
-
14th December 2010, 08:56 PM #5
The solution to pollution is dilution.
Weaken the stain for end grain by mixing a neutral (colorless) "stain" by the same manufacturer as the stain you're using for the rest of the work. Like here: https://www.woodworkforums.com/f10/mailbox-post-41341/
Cheers,
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
14th December 2010, 09:21 PM #6
Thanks guys, it looks like I've some experimentation to do over the next couple of weeks. Some good ideas and links.
SBPower corrupts, absolute power means we can run a hell of alot of power tools
Similar Threads
-
Staining
By Gazza in forum FINISHINGReplies: 3Last Post: 8th August 2005, 05:10 PM -
staining
By gdf26562 in forum FINISHINGReplies: 10Last Post: 10th September 2004, 08:55 PM -
Staining End Grain
By Scott in forum FINISHINGReplies: 7Last Post: 12th April 2004, 11:35 AM