Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2001
    Location
    Melbourne
    Posts
    0

    Default northane 2 pack paint

    G'day forumites,

    I'm currently building a bathroom vanity unit with 2 doors and 2 shelves out of MDF/chipboard. My questions are, can I spray the cabinet with the 2 pack finish, let it dry and then apply another coat the following day without ruining anything, as it is very expensive.
    I've read the manufacturers instructions, which state when spraying to use the wet on wet method but no mention of subsequent coats.
    Has anyone used this finish either by brushing or spraying with good results?
    Is it possible to achieve an even level finish by brushing?
    If I choose to spray, is a CIG little beaver spray outfit suitable to use?


    Thanks in advance, Evan

  2. #2
    Join Date
    Jul 2003
    Location
    Melbourne
    Age
    53
    Posts
    1

    Default

    Hi Evan, have you had much experience spraypainting before? 2pack is pretty unforgiving... It drys very fast, brushing wont give you a good finish.

    I would aim to finish a job in the same day, if you have to wait a day, spray the primer on day one, then sand and spray the top coat/s on the following day.

    Try giving the manufacturer a call too, they are usally pretty helpful.

    As far as guns go, most people will use a HVLP spray gun and compressor. You'd have to try playing around with the mix and some sample peices to see if you can get a good finish with a little beaver. My gut instinct is it wont do the job, but the only way is to give it a go.

    good luck

    joez

  3. #3
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    608

    Default

    Do a bit or reading before you start. Two pack of any variety is dangerous stuff and is one of the reasons for paper suits and spray booths, it is illegal to spray it outside a booth for very good reasons. The early stuff used to enter the body through the skin and even the eyes so take appropriate precautions. Sorry to be a scaremonger but it is best to know before you start.
    CHRIS

Similar Threads

  1. Two Pack Epoxy Concrete Paint
    By Reno RSS Feed in forum CONCRETING
    Replies: 0
    Last Post: 4th July 2009, 09:20 PM
  2. finishing with 1 stage 2 pack paint ???
    By paul ss in forum FINISHING
    Replies: 1
    Last Post: 28th March 2009, 07:40 PM
  3. Replies: 4
    Last Post: 12th April 2008, 07:24 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •