Results 1 to 3 of 3
Thread: what stain to use with shellac
-
11th November 2010, 08:12 PM #1New Member
- Join Date
- Sep 2010
- Location
- Brisbane
- Posts
- 3
what stain to use with shellac
Hi,
I wish to apply a stain to Aust. red cedar and then finish with a few coats of shellac. I have tried Wattyl Traditional Stain, but the shellac tends to wash some of the stain off. Does anyone know of a stain (such as Feast Watson etc) that can be used with shellac?
cheers
steve
-
11th November 2010, 10:06 PM #2
All water based stains/dyes, all chemical dyes, most turpentine stains. No alcohol based stains as they are pulled off into the shellac.
-
13th November 2010, 02:21 AM #3Intermediate Member
- Join Date
- Apr 2010
- Location
- Indonesia
- Posts
- 45
How do you apply the shellac? If you apply the shellac by wiping, padding or brushing, sure it will resolve some of the stain underneath.
The best way is to coat the shellac by spray.
Or you can try to tint the shellac with a dye or aniline then apply on your wood.
Good luck
wisno
Similar Threads
-
Shellac Pre-stain conditioner?
By Ian Butler in forum FINISHINGReplies: 2Last Post: 29th May 2010, 12:35 PM -
Stain under Shellac
By bigAl in forum FINISHINGReplies: 3Last Post: 16th August 2007, 10:58 AM -
Stain Under Hard Shellac
By Mmcbain in forum FINISHINGReplies: 2Last Post: 3rd June 2004, 12:42 PM -
Need help: Shellac over wood stain
By daveh in forum FINISHINGReplies: 6Last Post: 4th March 2004, 12:17 PM
Bookmarks