![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
8th October 2010, 07:40 PM #1
packing out windows flush with gyprock
Hi
I have packed out my internal walls with furring channel and gyprock, so consequently my sash windows need to be packed out flush with the gyprock for my architrave.
My question is what timber should i use? Depth varies from 50mm to 75mm, my plan is to scribe the timber then rip it down and screw it into position on the window.
I was just going to use 90x45 dressed pine on its side, sand it and paint it, but am thinking i will not get a good finish.
Any thoughts or suggestions welcome. Thanks
Read and reply to the full thread at RenovateForum.com....
Similar Threads
-
What packing under joists and how to do?
By shauno in forum FLOORING, DECKING, STUMPS, etc.Replies: 10Last Post: 4th July 2007, 07:25 PM -
packing under bearers
By 4woods in forum FLOORING, DECKING, STUMPS, etc.Replies: 4Last Post: 21st March 2007, 07:31 AM -
Single flush-Dual flush
By davo453 in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 3Last Post: 21st March 2006, 09:58 PM