![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 13 of 13
Thread: Blackwood kitchen benchtops
-
14th August 2010, 09:45 PM #1
New Member
- Join Date
- Aug 2010
- Location
- Victoria
- Posts
- 3
Blackwood kitchen benchtops
Hi all,
I am new to this site. Can I start by saying that it is an excellent site that provides a really useful resource to web users.
I have recently had a new kitchen installed with Tasmanian blackwood benchtops, including in the wet areas. The tradesmen who installed the kitchen gave me Organoil Woodsheen to oil the benchtops. I have read this oil described as a light buffing oil and I am concerned that it will not be enough to protect the wood in the wet areas.
What is the best treatment for blackwood in a wet area? Is Woodsheen appropriate, or is there something better available?
Thanks in advance,
Sam
-
14th August 2010, 10:26 PM #2
China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 140
Rustins Plastic Coating it is designed for that type of use
-
14th August 2010, 11:02 PM #3
U-Beaut has a food safe oil for bowls etc that could be good. You would have to talk to Neil though, I don't think its on the web site yet.
-
15th August 2010, 11:59 AM #4
New Member
- Join Date
- Aug 2010
- Location
- Victoria
- Posts
- 3
-
15th August 2010, 01:34 PM #5
Banned
- Join Date
- Jun 2007
- Location
- Otautahi , Te Wa'hi Pounamu ( The Mainland) , NZ
- Age
- 69
- Posts
- 0
How about laying on a good wood oil first , tung , linseed, or walnut , coat after coat until the timber does not absorb anymore. Then you know that it is waterproof.
At that point you can think about a final finish .
-
15th August 2010, 02:00 PM #6
The main thing with any oil is to make sure it is applied properly and gets right into the timber.
The first coat has to be a flood coat where the timber will no longer absorb any more oil.
Leave this on long enough for a cup of tea then buff of the excess.
Then with your damp wrag work in a second coat. Buff of any excess.
The for the next 3-4 days with a damp wrag again work in more of the oil and buff of.
Now leave for up to 2 weeks for the oil to fully cure and give a more water resistant surface.
If you use the benches prior to this you may brak the surface and weaken the finish.
Once a year clean down the bench top and apply another coat to keep the timber refreshed.
Kunos Countertop oil is good for this application as it is a bit more water resistant.
Make sure the undernath part of the bench top is sealed as well.Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
15th August 2010, 04:17 PM #7
Stupid question but didn't they finish the top at all. If they did then what's on it and does it really need to have something else put on it for protection?
I would have thought anyone making kitchens would already have a waterproof finish on the top of the benches. If so, there probably shouldn't be any reason for putting another finish over the top. With the exception of maybe a bit of upkeep once in a while and even then only if really needed.
Cheers - Neil
-
15th August 2010, 05:15 PM #8
Banned
- Join Date
- Jun 2007
- Location
- Otautahi , Te Wa'hi Pounamu ( The Mainland) , NZ
- Age
- 69
- Posts
- 0
True , maybe thats' what the Organoil Woodsheen was for , a bit of a wipe over sometime down the track
-
19th August 2010, 11:45 PM #9
New Member
- Join Date
- Aug 2010
- Location
- Victoria
- Posts
- 3
I think that is right. I guess my question is whether I should be doing more than just using the Organoil to preserve the benchtops, especially in the wet area.
-
19th August 2010, 11:52 PM #10
Banned
- Join Date
- Jun 2007
- Location
- Otautahi , Te Wa'hi Pounamu ( The Mainland) , NZ
- Age
- 69
- Posts
- 0
You could ring the tradesmen and ask them , after all they are the experts on the matter .
-
20th August 2010, 11:21 AM #11
Senior Member
- Join Date
- Dec 2008
- Location
- Tasmania
- Posts
- 0
Finishing Blackwood Bench Tops
Hi Whitepink59,
It's nice to see a real easy question for a change. There's only one product that I know of that will give you the surface and the level of protection you need on bench tops in wet areas.The product is Wattyl 7008 two pack gloss varnish. That the brushing version, no doubt there is a spraying version but I haven't used it. I've got celery top pine kitchen and bathroom benches put into service 17 years ago and finished with two coats of 7008. I've refinished the kitchen ones once and haven't needed to do the bathroom ones yet and no sign of needing to so far.
If you use the Wattyl 7008 there's a few tricks in applying it. It's got fantastic self levelling characteristics so put on a reasonably generous application with a good brush and THEN LEAVE IT ALONE TO DO ITS OWN THING. On no account attempt to brush and brush it; it doesn't work that way; trust me.
Watch out for the fumes with 7008. It's got an organic solvent thinner and IMO ypou need to wear a PPE mask to suit. Also best to send the non essential domestic personnel for R & R elsewhere for three or four hours. Fumes are just about gone in that time in my experience. No need to buy the very expensive proprietary brush cleaner; just use paint thinners or commercial grade acetone.
Old Pete
-
21st August 2010, 09:37 AM #12
Novice
- Join Date
- Jul 2008
- Location
- Banyo Qld
- Age
- 78
- Posts
- 15
Waste of time. The benches are already finished. He doesn't need to finish them again and the 7008 wouldn't take over another finish anyway.
Originally Posted by Manuka Jock
If it's finished properly there should be no need for anything other than a wipe with a damp cloth after use.
DarkyEvil to the bone.But really cute.
-
19th November 2010, 07:44 PM #13
Banned
- Join Date
- Jun 2007
- Location
- Otautahi , Te Wa'hi Pounamu ( The Mainland) , NZ
- Age
- 69
- Posts
- 0
Darklord , you may be a poor tradesman , but it is insulting in the extreme for you to tar all tradesmen with with the brush that is used on you .
The tradesmen who built the bench tops in question and coated them with finish are the experts in this case.
You are not .
Similar Threads
-
Kitchen benchtops
By fencepost in forum KITCHENSReplies: 4Last Post: 13th October 2005, 06:56 PM -
Kitchen Benchtops
By ChrisM in forum KITCHENSReplies: 1Last Post: 5th June 2003, 12:26 AM