![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: hall table
-
5th August 2010, 07:21 AM #1
New Member
- Join Date
- Aug 2010
- Location
- england
- Posts
- 5
hall table
hi guys me again would apreciate some input i picked up a small hall table with barley twist legs it was in a poor state . The glue was thrown on the top was in three peices and badly glued together, i have stripped and rubbed down 80% of the table my question is im going to place four dowels to hold the three peices together but one corner is warped slightly is their and way of pulling the twist in the wood out.
thnks in advance