![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: surveyor levels AHD
-
15th July 2010, 09:40 PM #1
surveyor levels AHD
I notice that council require levels to AHD these days, last time I simply referenced from my front gutter being zero and showed the contours based on the good old spirt level on the stringline. Not entirely accurate but within a few mm. (and $450 cheaper) I have found a survey mark on the corner of a cross street nearby and taken some measurements from this point to my gutter using the same method tape/stringline. I believe this would be good enough for establishing a AHD for that point and then providing relative levels from this.
I also note there is a nail in the gutter which has been used before, is this a registered point with the lands dept?
Read the full thread at RenovateForum.com...
Similar Threads
-
recommend me a surveyor in adelaide
By Reno RSS Feed in forum GENERAL ODDS N SODSReplies: 0Last Post: 15th December 2009, 07:20 PM