Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 11 of 11
  1. #1
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    0

    Default Removing screws stuck in metal

    Cheers, Ern

  2. #2
    Join Date
    Sep 2004
    Location
    Glenhaven, NSW
    Age
    82
    Posts
    80

    Default

    Ern,
    I've just got hold of some stuff called Reducteur for loosening screws corroded into metal. The blurb says spray on, leave for 30 seconds and then remove the screw/bolt.
    I was trying to remove the fixing bolts in an old Hills Hoist, must be at least 50 years old!
    I had tried WD40, heat etc, the hex flats were all rounded over from the spanner and still nothing moved. A spray with the stuff, and, sure enough, the bolts unscrewed with a vicegrip clamped on the head!
    Cheers
    Graeme

  3. #3
    Join Date
    Feb 2008
    Location
    Victoria
    Posts
    596

    Default

    If only I had known of reducteur life would have been much easier though my vocabulary less colourful

  4. #4
    Join Date
    Aug 2005
    Location
    Queensland
    Posts
    613

    Default

    Quote Originally Posted by graemet View Post
    Ern,
    I've just got hold of some stuff called Reducteur for loosening screws corroded into metal. The blurb says spray on, leave for 30 seconds and then remove the screw/bolt.
    I was trying to remove the fixing bolts in an old Hills Hoist, must be at least 50 years old!
    I had tried WD40, heat etc, the hex flats were all rounded over from the spanner and still nothing moved. A spray with the stuff, and, sure enough, the bolts unscrewed with a vicegrip clamped on the head!
    Cheers
    Graeme
    Sounds really worthwhile

    - what's in it?

    - where do you get it from?

    - does it have a shelf life?

    - how much?

    Thanks in advance,
    Bob

  5. #5
    Join Date
    Mar 2007
    Location
    Munruben, Qld
    Age
    83
    Posts
    0

    Default

    Quote Originally Posted by Bob38S View Post
    Sounds really worthwhile

    - what's in it?

    - where do you get it from?

    - does it have a shelf life?

    - how much?

    Thanks in advance,
    Bob
    You can get it from Blackwoods. Check this list for your nearest outlet
    Reality is no background music.
    Cheers John

  6. #6
    Join Date
    Mar 2008
    Location
    Lambton, Newcastle, NSW, Australia
    Posts
    0

    Default

    Wish I'd had some when I was 18
    Instagram: mark_aylward
    www.solidwoodfurniture.com.au


    A good edge takes a little sweat!!

  7. #7
    Join Date
    Feb 2008
    Location
    Victoria
    Posts
    596

    Default

    I see you can get it in 25 litre drums. Enough for the biggest of rust collections

  8. #8
    Join Date
    Aug 2005
    Location
    Queensland
    Posts
    613

    Default

    Thanks John, I'll check it out.

  9. #9
    Join Date
    Sep 2004
    Location
    Glenhaven, NSW
    Age
    82
    Posts
    80

    Default

    Some Bunnys have it at about $20 a spraycan (all you'll need for a lifetime). It's in the tool dept. on the same shelf as WD40.
    Cheers
    Graeme

  10. #10
    Join Date
    Feb 2008
    Location
    Victoria
    Posts
    596

    Default

    Quote Originally Posted by graemet View Post
    Some Bunnys have it at about $20 a spraycan (all you'll need for a lifetime). It's in the tool dept. on the same shelf as WD40.
    Cheers
    Graeme
    Has to be worth a try, even from Bunnies
    Cheers,
    Jim

  11. #11
    Join Date
    Aug 2005
    Location
    Queensland
    Posts
    613

    Default

    Yep - picked up a can [300g] from the big green box - and, as was stated above it is beside the WD40.

    For those chasing the same - I hope your green box is a little more generous than our new [1 and only] green box is here as it sells for $29.90 a can.

    It does state on the can that it has unlimited shelf life so unless it loses its propellant it should be fine.

Similar Threads

  1. removing screws /putty
    By dzcook in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 4
    Last Post: 12th July 2004, 11:02 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •