Results 1 to 10 of 10

Thread: Spray Gun Types

  1. #1
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    608

    Default Spray Gun Types

    What are the differences between using a HVLP and a conversion spray gun and does anyone know if one is better than the other?
    CHRIS

  2. #2
    Join Date
    Jun 2010
    Location
    florida
    Posts
    3

    Default

    Quote Originally Posted by Mini View Post
    What are the differences between using a HVLP and a conversion spray gun and does anyone know if one is better than the other?
    the difference is with a hvlp You use 20lbs of air with lacquer 2mm nozel and with a 10% thinner added With the old type for paint and lacquer The nozel would have to be the right size and the air for pain probly at least 70 on up to maybe 90 lb's depends on the thinner or how thick the mix is A little more info on what type of finish would be used I have done both hope this helps del

  3. #3
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    608

    Default

    But what is the difference between using a conversion gun v's a HVLP gun. Is one better than the other?
    CHRIS

  4. #4
    Join Date
    Nov 2006
    Location
    Bendigo Victoria
    Age
    80
    Posts
    4,565

    Default

    Quote Originally Posted by Mini View Post
    But what is the difference between using a conversion gun v's a HVLP gun. Is one better than the other?
    In short, High Volume Low Pressure guns use less air pressure and can apply the paint at a higher viscosity (ie less thinning required).

    This results in a lot less over spray and less paint being used and/or wasted.

    I have a Porter Cable unit that Carbatec used to sell and it does a great job.

    They do however require a compressor that can deliver a fair volume of air, albeit at lower pressure.

  5. #5
    Join Date
    Jun 2010
    Location
    florida
    Posts
    3

    Default

    Quote Originally Posted by Mini View Post
    But what is the difference between using a conversion gun v's a HVLP gun. Is one better than the other?
    Both spray Cost about the same depends on what price you pay Their are not that much difference The hvlp uses a cup on top of the gun Conversion use the cup on the bottom Their are air difference 20lb with hvlp and 60lb up to 90lb the conversion gun may have more over spray due to the more air I guess it is your choice I perfer the hvlp Less air and less over spray More finish get on the item being spraid Now the conversion will do the same It will get the Job done I guess their is no real answare which is best You pick and it will work I have both and i use the hvlp all the time

  6. #6
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    608

    Default

    Thanks Fred, I understand the principles I just wanted some comparison of is one better than the other and why. Air supply is not a problem, it just cost me $2800 to fix that. It seems to me that it may not be worth buying an expensive HVLP kit if the conversion gun comes close to its performance but if it is no where near the HVLP then it may be worth the investment. So, simply put how do they compare?
    CHRIS

  7. #7
    Join Date
    Nov 2006
    Location
    Bendigo Victoria
    Age
    80
    Posts
    4,565

    Default

    Chris, having never used the dedicated HVLP kit I can't give you a comparison.

    I don't know what you are trying to spray and on to what, but I have sprayed all sorts of finishes, enamel, lacquer and water based (in gfact spryed the whole outside of my shed with water based finish with this gun) and I wouldn't swap it for anything else.

  8. #8
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    608

    Default

    Del thanks for your reply, looking at this Wagner HVLP Conversion Gun - HVLP Conversion Gun They say only 20PSI at the gun, is this different to yours?
    CHRIS

  9. #9
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    608

    Default

    Spray gun types have always been a mystery to me and HVLP seems to be the go except it has one drawback, damned expensive as a turbine kit. I haven't got to the spraying stage yet and it will spray everything from paint to lacquer I guess.
    CHRIS

  10. #10
    Join Date
    Jul 2007
    Location
    Carabooda WA
    Age
    59
    Posts
    0

    Default

    HI Mini

    I use a STAR for Furnitue Lacquer and Auto Paint

    STAR-SPRAY GUNS & EQUIPMENT - Great Saving - VEK TOOLS

Similar Threads

  1. Replies: 3
    Last Post: 31st May 2006, 01:33 AM
  2. spray can vs spray gun - ease of use
    By Jolted_Chicken in forum FINISHING
    Replies: 5
    Last Post: 29th October 2003, 06:04 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •