![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
Thread: Search for Chisel Maker
-
27th May 2010, 10:55 PM #1
Deceased
- Join Date
- May 2008
- Location
- Australia
- Posts
- 2,306
Search for Chisel Maker
Apart from Titan Chisels, the McPhersons Catalogue also listed English Made Chisels.
If anyone has one of these catalogues, could check to see if a if ROBINSON HALL/SHEFFIELD is included in the catalogues index or listing.
This Company manufactured Joinery Tools from about 1942 - 1974. They used a Scottish Thistle in their trademark
Your help would be much appreciated. I am trying to compile a history on this tool maker.
planemaker.
-
28th May 2010, 11:25 AM #2
Senior Member
- Join Date
- Oct 2006
- Location
- Brisbane
- Posts
- 131
hi planemaker, my McPherson's Industrial Catalog is from the late1960s (it does not actually have a date that I can find but I was told by the previous owner that it was from 1968), has an index of products but does not index the manufacturers.
This catalog has two pages that contain woodworking chisels. Page 656 has various Titan wood chisels and a listing for 'Patternmaker's Chisels' but no accompanying photo for the Patternmaker's chisels so the manufacturer is unknown and Titan is not known to have made these.
Page 657 has further Titan models, a couple of Berg's chisel styles, a Marples turning set, Millers Falls carving chisels and gouges, some Chip Carving tools, and in the middle of all that, 'Turning Chisels' and a 'Parting Tool' with no maker listed and no photo to identify them.
Sadly nothing to identify anything as Robinson Hall
-
28th May 2010, 12:23 PM #3
Deceased
- Join Date
- May 2008
- Location
- Australia
- Posts
- 2,306
Thanks pjr. Appreciate the feedback from you. Good work.
planemaker.
Similar Threads
-
Do a search...
By jmk89 in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 22Last Post: 12th March 2007, 08:29 AM