![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 16 to 27 of 27
-
21st January 2005, 09:23 PM #16
It's a brand of home brew beer.
Ken
-
21st January 2005, 09:56 PM #17
Originally Posted by craigb
Mullion - Vertical member between window units.
Muntin - (Sash Bar) - (Window Bar) - (Glazing Bar) - a secondary framing member (horizontal, vertical, or slanted) to hold the window panes in the sash. This term is often confused with Mullion.
-
21st January 2005, 10:35 PM #18
Originally Posted by Grunt
that you buy when you're a playboy Mullionaire
Bruce C.
catchy catchphrase needed here, apply in writing to the above .
-
21st January 2005, 10:40 PM #19
Do sheep wear merkins? Maybe only after shearing...
-
21st January 2005, 10:43 PM #20
Gentlemen, thank you all for your gratifying and not a little amusing reactions to my small effort.
Muntins. The vertical dividing members separating the panels in a door.
-
21st January 2005, 10:53 PM #21
This thread should be framed and set aside, as an example of how things happen on this BB.
A little bit of fun, but the correct answer/advice as well.
Tim
Ps welcome Ralph #2
-
21st January 2005, 11:49 PM #22
I'd always used the term to mean both glazing bars as well as vertical dividing members in a door. I thought I'd better look it up. From "A dictionary of building" Penguin reference books:
Muntin [joi] (1) A subsidiary vertical framing member in a door, framed into the rails , separating the panels, usually of the same width as the stiles .
(2) (USA) A glazing bar or a mullion .
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
22nd January 2005, 12:34 AM #23
Is this the New Zealand currency?
-
22nd January 2005, 09:40 AM #24
Ralph #1 always used to sign off "respectfully". What's the matter, don't you respect us?
-
22nd January 2005, 04:17 PM #25
Originally Posted by craigb
Probably because NotRalph is probably an Aussie. Since when do we sign of with respectfullyand if we did would we mean it.
Peter.
-
22nd January 2005, 06:55 PM #26
-
22nd January 2005, 06:56 PM #27
Bookmarks