![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
23rd May 2010, 07:50 AM #1
After restump window wont shut & has odd gap?
Ok, you may have read my earlier post when I shattered my bearer, it been replaced (that was a huge job). Well, if you haven't a quick introduction: I'm the crazy rural guy, that has spent years waiting for someone come and restump my house. Heaps of phone calls, but no-one has ever come to see the place as its to remote.
Since replacing my bearer, I've been unable to close my window, problem is its in the loungeroom and it getting cold at night. Taped it and put cardboard over it to stop draft but its still cold. I've checked the level (its ok), checked everything I can think of, the track and the bit that the window should slide into to close and it all looks ok.
Any suggestions on how I can fix it? Its an aluminium window frame.
Read and reply to the full thread at RenovateForum.com....
Similar Threads
-
Restump or repack? - Different recommendations given
By glens22 in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 12Last Post: 9th March 2010, 09:42 AM -
Do I need to restump the whole house?
By Kerryv in forum FLOORING, DECKING, STUMPS, etc.Replies: 13Last Post: 23rd June 2007, 11:37 PM -
Restump
By Andyng in forum FLOORING, DECKING, STUMPS, etc.Replies: 3Last Post: 16th May 2005, 10:55 PM