Results 1 to 7 of 7
  1. #1
    Join Date
    May 2010
    Location
    Regency Downs
    Posts
    2

    Default A new verandah in the Lockyer Valley

    I am newly retired and am planning, no, I am going to build a large verandah on the back of our large home here in South East Qld. My plans were prepared by a draftsman, and council approval has been received.

    I have a number of books in my library, and completed the Owner Builder Course about 3 years ago. There is a lot I don't know, however, and no doubt I will be an active member of this forum for some time.

    The hardwood bearers I will be using are 75mm thick. Now my hand held circular saw cuts about 60mm I think, and I have a number of cuts to make, not to mention the rafters and the joists.

    I am using predominantly hardwood. Cutting it is not going to be fun. Can anyone tell me which forum I should use to get information about the equipment I need to cut such thick timbers.

    Looking forward to some good advice.

    Regards

    Alan

  2. #2
    Join Date
    Mar 2007
    Location
    Munruben, Qld
    Age
    84
    Posts
    0

    Default

    Hi and welcome to the madhouse. Try here with your question
    Reality is no background music.
    Cheers John

  3. #3
    Join Date
    May 2009
    Location
    hervey bay
    Posts
    1

    Default

    Alan
    Firstly welcome
    The other place you could try for advice is the small timber milling section. Might even find a local miller who can supply you with the timber you need
    I'm in the middle of a similar job but have the advantage of having a Lucas mill.
    As for cutting joinery (halving jions, birdmouths etc) in the timber I'm using the trusty hand saw for things bigger than a powr saw will cut.
    Have a great time doing your job

  4. #4
    Join Date
    Jan 2004
    Location
    Towradgi
    Posts
    2

    Default

    Or you could use it as an excuse to get one of these toys
    Pat
    Work is a necessary evil to be avoided. Mark Twain

  5. #5
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    77
    Posts
    0

    Thumbs up

    G'day Alan and welcome to the forums.

    Just follow the advice above and your verandah is sure to come together and look schmick.

  6. #6
    Join Date
    May 2010
    Location
    Regency Downs
    Posts
    2

    Default

    Thanks for the direction, Munruben. I am looking forward to spending time on the forum.

    Regards

    Alan

  7. #7
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Welcome to the forum.

Similar Threads

  1. verandah floor
    By dzcook in forum FLOORING
    Replies: 2
    Last Post: 26th March 2006, 10:27 PM
  2. New Verandah
    By Bella in forum FLOORING, DECKING, STUMPS, etc.
    Replies: 16
    Last Post: 5th July 2005, 04:58 PM
  3. Verandah posts?
    By gemi_babe in forum FLOORING, DECKING, STUMPS, etc.
    Replies: 5
    Last Post: 9th November 2004, 12:21 AM
  4. Verandah T&G
    By neddy in forum FLOORING, DECKING, STUMPS, etc.
    Replies: 1
    Last Post: 29th September 2004, 08:05 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •