![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
Thread: cutting glass
-
29th April 2010, 11:02 PM #1
Intermediate Member
- Join Date
- Mar 2007
- Location
- Esperance
- Posts
- 7
cutting glass
ok so not exactly leadlight but still glass none the less i am currently attempting to make a few aquariums just for personal use and have been fine using one of those $20 oil filled cutters you can get from bunnings i think it was a trojan and while that is fine with the 3-6mm glass i am unable to cut anything bigger so does anyone know what type of cutter i should buy and can you get one that will cut everything from 3-10 or even 12mm glass..
thank you
neil
-
4th May 2010, 10:12 PM #2
Senior Member
- Join Date
- Feb 2009
- Location
- ACT
- Posts
- 0
I've only ever cut light weight glass (up to 5mm) but I assumed the concept is the same for thicker stuff.
Guess you just have to push it harder to get the break to start running. Or have you tried that and ended in failure?So many ideas........so little skill........
-
4th May 2010, 10:20 PM #3
GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Port Huon
- Posts
- 373
Try cutting along the line on both sides of the glass.
Break in the normal manner.Geoff
The view from home
Similar Threads
-
Cutting and sanding glass - dummy alert!
By abitfishy in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 23Last Post: 7th February 2007, 04:03 PM -
Cutting a 125mm hole in glass window?
By Gibbo in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 18Last Post: 18th August 2006, 10:53 AM -
while you're all in glass-cutting mode...
By meaning in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 1Last Post: 10th July 2004, 08:29 AM