![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
-
19th April 2010, 10:45 AM #1
Intermediate Member
- Join Date
- Jul 2007
- Location
- Brisbane Australia
- Posts
- 12
Best finish for Kwila deck furniture - undercover
I've just cleaned up the mould off the kwila deck table and chairs, then coated with Intergrain anti-mould stuff.
Next it's a case of what to throw on to keep it nice.
I'm tempted to use Cutek - but it smells for a few weeks, and made the skin on my hands peel off (literally) when I used it without gloves - maybe a little too toxic for my kids to eat off.
What are people getting good results from?
Cabots / Feast W decking oil is out - it's browns off too much for my taste.
Thanx
Paul
-
19th April 2010, 02:08 PM #2
Why not use the Intergrain finishing oil. If you buy the neutral oil, it gives you a nice natural finish. Easy as to put on. I just give my table and benches one coat every 6 months and it survives the great outdoors very well. Since it is primarily Tree turpentine, its not that toxic either.
Regards,
Rob
-
1st May 2010, 11:03 AM #3
Intermediate Member
- Join Date
- Jul 2007
- Location
- Brisbane Australia
- Posts
- 12
I had heard the natural oils can foster mould.
It's under cover, but gets blown in rain etc.
Has anyone seen mould issues with the "Natures Timber Oil"?
Thanx
Paul
-
2nd May 2010, 10:25 AM #4
SENIOR MEMBER
- Join Date
- Oct 2008
- Location
- Gold Coast
- Age
- 50
- Posts
- 0
i treat all my outdoor furniture with 2 wet on wet coats of intergrain dimension 4. leave for one day to dry and then coat with a polyurethane finish such as intergrain floortec.
justin.
Similar Threads
-
Should I stain my Kwila deck before oiling?
By lsneesby in forum DECKINGReplies: 5Last Post: 21st August 2007, 11:12 AM -
Kwila Outdoor Table Finish
By aussieorchid in forum FINISHINGReplies: 0Last Post: 19th March 2007, 09:27 PM -
Fasteners for Kwila Deck to steel joists
By HandP in forum DECKINGReplies: 5Last Post: 29th August 2006, 11:05 AM