Results 1 to 6 of 6

Thread: Worksharp 3000

  1. #1
    Join Date
    Sep 2008
    Location
    Caboolture
    Posts
    3

    Default Worksharp 3000

    This is the easiest way to keep your hand tools.... chisels and plane irons ... sharp... Also great for turning tools and carving chisels... curved as well as straight..


    “Work Sharp” is an innovative grinding & sharpening system for sharpening Chisels, Plane Blades, Scrapers, Axes and much more with speed & precision. Work Sharp offers 3 easy ways to grind and sharpen: The Chisel and plane iron port, freehand on top for larger flat blade tools, and the Edge-Vision port, which allows you to see the cutting edge of carving tools, lathe tools and more as you sharpen or grind. The 2 sided grinding wheel allows you to quickly and easily switch between coarse and fine abrasive disks.

    I had been looking at the Worksharp sharpening system for some time... on the web... I had read every review and watched every video... over and over again. Every one of these reviews was favourable and many of my friends on Lumberjocks have one and have commented on them... I knew i wanted one but it was pointless trying to import one into Australia... different voltage..oh well..back to sandpaper glued to a granite slab..I had even tried all the jigs and stones... but I am not really into all the work that is required... I am after Lazy Larry...as for the water wheels... either they are messy or terribly expensive.. Even though the Worksharp 3000 is a little on the costly side the speed and proficiency of the machine in sharpening all tools with minimum effort makes this worth the money..

    And then lo and behold I was looking again and saw that they were being imported into Australia... Industrial Tool & Machinery Sales are Importers & National Wholesalers of a wide range of quality engineering machinery & equipment. So I went to their website and could not find any resellers or prices... So I rang them up to find out where I could buy one of these machines..and how much one would set me back..

    .After talking to one of the guys at Industrial Tools, I decided that as a small production shop I should probably get the Workshop 3000.. It has a few features not available on the 2000 which is still a great little machine in its own right. The main difference is the 3 different angles in the chisel sharpening port..

    At 10 o'clock the very next morning a big courier truck arrived at my workshop with a big box... the Worksharp 3000 was here..Inside the large box was the machine itself, a wide blade attachment for plane irons larger than 2 7/8 inch and all the accessories... 2 glass wheels to atttach the self adhesive sandpaper ... a different grit on each of the 4 sides.. a slotted plastic wheel and slotted paper for under the wheel sharpening...curves chisels and gouges...plus several sheet of various grit sandpaper.. and a replacement sheet for the sharpening port.. You can see the ins and outs of this machine on the video[ame="http://www.youtube.com/watch?v=XTkqOKuBAA4"] video [/ame]
    I will be making a short video of my own when I get my camera.. Just to show how a bloke like me can get chisels scary sharp fast and easily with little if no effort...in almost no time at all...I got one of my trusty rusty old bought at a flea market chisels and after less than 10 minutes had flattened the back and sharpened the chisel so sharp I could shave the hairs on my arm... and it had a mirror finish..and I did not have to do much... the machine seemed to do all the work for me...Just had to turn over the glass wheels a few times and voile done... next came a near new chisel which took so little time to bring it up to par I was really amazed. Check out the comments over at Lumberjocks... I posted this review there as well..

  2. #2
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    608

    Default

    What do you do for replacement consumables? Are they a standard paper?
    CHRIS

  3. #3
    Join Date
    Sep 2008
    Location
    Caboolture
    Posts
    3

    Default Replacement Paper WS 3000

    Hi Chris... yes you can use any PSA adhesive backed sandpaper... just cut to size once it is glued on... and the centre hole too of course..

  4. #4
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    608

    Default

    I finally released the moths out of the wallet and bought a 3000 and had never seen self adhesive paper before this. I will have a look at the sandpaper man and see what is there. It seems pretty impressive so far as I haven't wrecked anything I have sharpened. I might have a go at drill bits on it and see what happens.
    CHRIS

  5. #5
    Join Date
    Jan 2004
    Location
    Towradgi
    Posts
    2

    Default

    Interesting Chris . . . it might like a trip to my truck, when I call in . . . just box it up
    Pat
    Work is a necessary evil to be avoided. Mark Twain

  6. #6
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    608

    Default

    Quote Originally Posted by Pat View Post
    Interesting Chris . . . it might like a trip to my truck, when I call in . . . just box it up
    I threw the box out so that will save time.
    CHRIS

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •