![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: Saw measurements.
-
4th January 2010, 11:06 AM #1
Saw measurements.
Hi everybody.
I've noticed that the Carba-tec MJ2325CT tablesaw has had a price drop to $1195 on thier website. Was close to buying one at the WWWT in melb when the price was still close to $1600.
Anyway, now that the price is looking better, i'm looking at one again.
I'm a little tight on space (1 car garage), so need to squeeze it along side the bench on a mobile base.
Carba-tec only supply footprint measurements for this version with a slider, which i dont want. I only want the standard version.
Can anybody out there with this saw help me out with overall width and depth measurements including fence handles, rear dust port et al so i can make sure it fits on the space i've got?
Much appreciated,
Steven.
-
20th February 2010, 01:05 AM #2
Hi Steven
I have got the Caba-tec 2008 catalogue, it features the MJ2325B. I think the saw will be the same probadly as the one you are looking at. Size quoted is 1500x930x1080. Hope this helps
Cheers Jerry
-
23rd February 2010, 03:21 PM #3
mine is approx 1200 wide by 1100 deep including fence handle
Have a good one
Keith
-
25th February 2010, 09:01 PM #4
Thanks Jerry and K_S.
I ended up getting the MJ2325CT (without slider) and with a bit of shifting managed to just sqeeze it beside my bench and out of the way. No room to spare, the fence rails just scrape on the wall as i wheel it into place.
The pitfalls of having no space and large tools!!!
Thanks again.
Steven.