Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 7 of 7
  1. #1
    Join Date
    Jan 2002
    Location
    Sunshine Coast, Qld
    Posts
    117

    Default Secrets of a Carpet Repairer

    I want to try to repair a small (1cm wide) burn mark in a carpet. I have spare carpet to use, and thought I could punch a small circle from that and use it to fill a similar sized punched hole where the burn mark is. Does anyone know if that is how the experts do it? I tried Googling carpet repairs and one repair company said their repairs were carried out by a Master Technician. Should I do a course before I attempt this?!
    Rusty

  2. #2
    Join Date
    Nov 2007
    Location
    belgrave
    Age
    61
    Posts
    0

    Default

    If its just a machine made carpet I think It couldn't hurt to try. Hand made might be a little trickier. But not much. You can get carpet tape from carpet places pretty easily. You probably have to buy a whole roll though. Or you could just stick the edges onto a piece of fabric with contact adhesive. Use the fabric like sticky tape. Then you won't have fraying problems.
    anne-maria.
    T
    ea Lady

    (White with none)
    Follow my little workshop/gallery on facebook. things of clay and wood.

  3. #3
    Join Date
    Mar 2007
    Location
    nth coast nsw
    Posts
    0

    Default

    I used to play footy with a house painter.
    he was an expert at colour matching,
    when he'd dribble paint on someones carpet he'd paint over it with carpet coloured paint

    what if the hokey pokey is really what it's all about?

  4. #4
    Join Date
    Jun 2003
    Location
    ...
    Posts
    1,460

    Default

    Quote Originally Posted by JB View Post
    I want to try to repair a small (1cm wide) burn mark in a carpet. I have spare carpet to use, and thought I could punch a small circle from that and use it to fill a similar sized punched hole where the burn mark is. !
    I used to know a carpet layer and that's what he did. Although he used that glue tape and hot iron that they join carpet with. Use double sided tape (only need to use one side leave the backing tape on) but make sure that it is larger than the patch so that it will stick to both carpet and patch and press down firmly.

    Some carpet have the pile one way so make sure it is the same otherwise in some light condition you will always see the patch. They did it wrong at one place I worked and they had to come back and fix it.

    Good luck.


    Peter.

  5. #5
    Join Date
    Jan 2002
    Location
    Sunshine Coast, Qld
    Posts
    117

    Default

    Thanks
    Rusty

  6. #6
    Join Date
    May 2006
    Location
    Lake Macquarie NSW Australia
    Posts
    4

    Default

    Tape a new piece of carpet over the top of the damaged section.
    Use a Stanley knife to cut through both pieces at once.
    Remove the damaged section and replace it with new piece cut exactly to size.
    Note underlay may be cut and would need to be glued to floor and then new carpet glued to it. ----------- Good Luck.

  7. #7
    Join Date
    Jan 2002
    Location
    Sunshine Coast, Qld
    Posts
    117

    Default

    Thank you! So that's how the experts do it...with a knife and not a punch?
    Rusty

Similar Threads

  1. Best floorboard repairer in Melbourne?
    By kris07 in forum FLOORING
    Replies: 2
    Last Post: 25th October 2007, 06:36 PM
  2. Varnishing secrets article in FWW #168
    By snowman in forum FINISHING
    Replies: 1
    Last Post: 29th January 2004, 12:27 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •