![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
20th January 2010, 09:10 AM #1
Is It Okay To Punch Holes In Roof Sheets?
I'm laying roof sheets and I find my tek screws slide and slither everywhere so I punch a hole or an indentation for a starter.
I've done this before and it seemed to work okay - the roof is still up and working well after many years.
But googling around I find suggestions from people who should know that I shouldn't do this.
Like here: Steeline - Technical Information
Any experienced people can pronounce on this?
Or maybe tell me why I can't just drill straight through with my tek screw? Offer some technique that'll enable me to do that?
ab
[url=http://www.renovateforum.com/f83/okay-punch-holes-roof-sheets-88839/Read the full thread at RenovateForum.com...[/url]
Similar Threads
-
Filling big holes to make smaller holes
By Sir Stinkalot in forum GENERAL ODDS N SODSReplies: 9Last Post: 4th October 2003, 01:51 PM