Page 2 of 2 FirstFirst 12
Results 16 to 20 of 20
  1. #16
    Join Date
    Nov 2004
    Location
    Port Pirie SA
    Age
    52
    Posts
    0

    Default

    You can leave the enamel in the pot Jill like wheelin said but you must still clean the gun out fully if leaving it for more than 20 minutes or so.
    ....................................................................

  2. #17
    Join Date
    Mar 2008
    Location
    Townsville, Nth Qld
    Posts
    102

    Default

    thanks Harry, do you mean strip the gun down between coats, or just use another pot with thinners and squirt that through?
    regards,

    Dengy

  3. #18
    Join Date
    Nov 2004
    Location
    Port Pirie SA
    Age
    52
    Posts
    0

    Default

    Between coats on enamel(not that quick dry crap)should be a minimum of 12hrs so yes the gun will need cleaning, personaly I would clean the pot too because the paint on the side walls above the paint level will cure and will need stripper to remove it.
    ....................................................................

  4. #19
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    0

    Default


  5. #20
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    0

    Default

    I sort of recall going over this 12 months ago with Garfield often good to do somethings again.

Similar Threads

  1. Malaysian Rubberwood finish problem
    By Smurf1 in forum FINISHING
    Replies: 1
    Last Post: 16th September 2008, 11:04 AM
  2. Problem with spotty finish
    By OrcaSoul in forum FINISHING
    Replies: 7
    Last Post: 9th August 2007, 04:13 PM
  3. Alkathane Finish Problem
    By Malic in forum FLOORING, DECKING, STUMPS, etc.
    Replies: 6
    Last Post: 21st September 2006, 11:39 PM
  4. pine finish problem
    By keju in forum FINISHING
    Replies: 4
    Last Post: 14th June 2006, 01:09 AM
  5. How do I finish this with this problem
    By jow104 in forum FINISHING
    Replies: 4
    Last Post: 22nd October 2004, 01:26 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •