![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: screwed little screw
-
16th November 2009, 04:10 PM #1
screwed little screw
Hi everyone, hoping you might be able to help with this one. I have just completed my deck, I will send photos through soon. Towards the end of laying the merbau decking of which I screwed down using type 17 s/s screws I had 4 screws which the head of the screw rounded out. I was able to get 2 of the screws out with pliers but the other 2 were too far in to get a decent grip with the pliers. Any thoughts on how to get out without damaging the board & the joist?
Cheers
Ibrox
Read the full thread at RenovateForum.com...
Similar Threads
-
Being Screwed by local Business'
By Riverland in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 37Last Post: 11th August 2006, 04:10 PM