![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Bosch 26e HW main controller
-
28th October 2009, 10:20 AM #1
Bosch 26e HW main controller
Hi, we have just had one of these instant gas HW systems installed and am very happy
see-------- :) :) :)
My question is about the main controller that is an optional fit.
Its the one that can set the temperature of the HW which is good for the shower etc.
The plumber tried to explain how it works but now I am confused (it isnt fitted yet).
Can someone explain how it works.
From what i understand if I fit it then whatever temp it is set at then the entire house will have that temp water. So the kitchen will only be 38deg or so. What if I want hotter water at the kitchen?
They also sell extra controllers. Do these fit in the line to that specific area or from the main console. I am able to fit the main controller however not sure about additional ones. Do these require 'plumbing' into the line?
cheers
Read the full thread at RenovateForum.com...
Similar Threads
-
Help with B&D Controller Door
By wash in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 16Last Post: 19th November 2006, 01:08 PM