JessEm Rout-R-Lift (PART 1 of 2)

[Park]

I've got one of these, however I don't have any instructions. I was going to use some pieces of wood to make myself a template however i'm not sure of the external curve radius. I went to rockler and picked up a very short 1/2 inch template bit. But now that i have it at home it looks a bit thin. Just wondering what you used for mounting it.

[Shedhand]

I've got one of these, however I don't have any instructions. I was going to use some pieces of wood to make myself a template however i'm not sure of the external curve radius. I went to rockler and picked up a very short 1/2 inch template bit. But now that i have it at home it looks a bit thin. Just wondering what you used for mounting it.

I used a 19mm (3/4" in your language) straight cutter. It will cut the correct radius. Use the main plate to mark the main cut-out then mark an inner cut-out 3/4" from the main cutout. Cut the inner out with a jig-saw then rout the main cutout. I clamped a ProGrip bar around the cutout giving me a router guide.
I reckon you could download the instructions from the JessEm web site or ask them to send it to you.
Cheers
Attachment 120427 Attachment 120428