Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: On the way to UK
-
1st August 2009, 12:07 AM #1
On the way to UK
We leave on 14 August for 5 weeks in the UK and some time in Italy. We fly from Cairns to Sydney and spend about 7 hours waiting for an international connection. If any one is not to far from the airport and has some spare time, would love to have a yarn.
JimSometimes in the daily challenges that life gives us, we miss what is really important...
-
1st August 2009, 10:26 AM #2
PP Jim have a safe and good trip spend wisely especially at Robert Sorbey, Aximinster Tools,
Have you got all the Wood Museums sorted
This time of year there are numerous Wood shows on
7 hrs in Sydney would love to, but cost of parking alone would be out of reach. I hope someone comes to see you.
I am sure you might even bump into other forumites heading that way also. I know of one for sure.
Ray
-
1st August 2009, 10:49 AM #3
Just thought Jim PP master of Segmentation is coming to Sydney shame we couldn't arrange a Shed saw & timber for a group of us
-
23rd September 2009, 11:32 PM #4
Well we are back in town. The British Isles is FULL of tourists. We got up as far as the Orkney Islands, down to Plymouth, across to Ireland for 6 days, then 5 days "relaxing" in London. 2 1/2 hour flight Italy for 10 days to see the leaning tower, Pompeii and Venice plus a few other places. The flight home was via Hong Kong, including a 15 hour wait between flights... not pleasant. Still damm good to be back in Aus.
JimSometimes in the daily challenges that life gives us, we miss what is really important...
-
24th September 2009, 09:35 AM #5
Welcome back Jim you didn't happen to bump into Jchappo did you he left about the same time.
-
24th September 2009, 11:32 PM #6
Welcome back. After that nice break you should be itching to get back to the lathe
Neil____________________________________________Every day presents an opportunity to learn something new