![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
9th September 2009, 09:39 PM #1
SENIOR MEMBER
- Join Date
- Jul 2003
- Location
- Melbourne
- Age
- 53
- Posts
- 536
Mitre Sled for tablesaw with a slider
Hi all, i find cutting mitres on my saw a real pain, i was thinking about making a mitre sled for my machine. Now i have seen a stack of mitre sleds for traditional tablesaws but never any for saws equiped with a slider.
Can anyone point me towards a plan/pic or suitable design?
I have been playing around with sketchup, but i am interested in finding out if anyone has any good solutions. The biggest issue i can see with my design is that the slider fence has to be removed , no big hassle but it will also mean i will lose my 90 degree reference to the saw blade making positioning the jig a little trickier.
Thanks
Joe