Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2009
    Location
    sydney
    Posts
    1

    Default Open Fireplace Question

    Hi Guys,

    First time poster here so please forgive me if I have posted this in the wrong section!

    We are about to insert a slow combustion wood heater into our open fireplace. We have pretty much picked the model we want however I seem to be getting some inconsistent advice on fluing. One person has said as long as the chimney is in good condition there is no need to put in a flu.

    Another guy (from a shop) said if we don't put in a flu then we will lose a lot of heat up the chimney. This doesn't sound right to me. A little bit of heat will obviously escape from the round hole on top of the unit, but would a flu really make it more effective then not having a flu and just making use of the chimney?

    Obviously installation will be easier without a flu and will also be a lot cheaper.

    Any advice would be greatly appreciated.

    Thanks.

  2. #2
    Join Date
    May 2006
    Location
    Adelaide
    Age
    71
    Posts
    10

    Default

    hello sbest1973
    and welcome to the forum.
    looking up the chimney in my lounge room, the gap would be too big for any combustion heater. a lot of the heat would escape as opposed to using a much smaller copper flue. have a look to the left column under "renovation forum" and put your post in there.
    i think you would get heaps of comments there.
    regards
    the block

  3. #3
    Join Date
    Mar 2008
    Location
    Hobart, Tas
    Posts
    135

    Default

    Hi Sbest,

    Having recently gone through installing a fireplace, and talking/researching with a lot of people, my understanding is as follows.

    An important function of the flue is the (relatively) high rate of air travel. You want fast moving air to ensure that all particles are lifted up and out fo the chimney. Now if you have a small opening at the top of your firebox, into a large volume chimney with a small opening at the top, you can see that the air in the large space is going to be moving very slowly, and not really able to support carrying particles in the updraft. This is also one of the reasons that you use a double/tripple skinned flu when on the outside of a house, so as to keep the heat in the air, maintaining the upgraft.

    I hope that helps.

Similar Threads

  1. Enclosing Open Fireplace.
    By STAR in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 7
    Last Post: 7th April 2008, 11:28 AM
  2. Open Slather question
    By jow104 in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACK
    Replies: 33
    Last Post: 29th March 2006, 08:17 AM
  3. rendered open fireplace surrounds
    By russ34 in forum RENDERING
    Replies: 3
    Last Post: 9th July 2004, 09:52 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •