![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 6 of 6
Thread: ye olde sewing table
-
29th August 2009, 04:25 PM #1scubabob Guest
ye olde sewing table
i have just stumbled across an old Singer treadle sewing machine which i have dated to being manufactured in 1888, which i purchased for SWMBO. she loves it, so i have many brownie points now for some time. It is complete, even has the tools and stuff.
The timber is mostly in good nick but as you can see there are a few 'rings' on the top and the table has lost its lustre, there's not much of a sheen left. i dont want to sand it back and chuck some glossy stuff on it, it should be done properly. i think the timber is solid too, not just veneered or ply
where do i start and what do i use?
-
29th August 2009, 05:10 PM #2
Hmm... someone been storing pot plants on it sometime in the past?
I think you will have trouble getting out those stains. Even with deep sanding they will most likely still be visable. Others will disagree, but my view is that its part of its history and a new finish shouldnt try and hide them.
-
29th August 2009, 06:20 PM #3
Senior Member
- Join Date
- Dec 2008
- Location
- Hunter Valley
- Posts
- 81
Try metho and 0000 steel wool.
If it is a shellac finish, you'll be able to remove the rings quite easily, and a little good quality wax will restore the sheen.
-
29th August 2009, 10:20 PM #4
China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 140
Scubabob I suggest you join here http://needlebar.org/bb2/index.php it is a wealth of information regarding old sewing machines
-
30th August 2009, 11:53 AM #5scubabob Guest
thanks all
-
1st September 2009, 08:51 PM #6
Singer sewing machines have that gadget factor to them don't they? You've found a beauty. Is it a US one?
My first restoration project was a 6-drawer 1935 UK Singer cabinet in highly figured walnut veneer. The finish for all these machines is shellac. A complete restoration of one of these isn't a job to be taken lightly - it actually took me the best part of a year to complete in high gloss french polish since there are so many surfaces to do. For something of 1880s vintage I'd start with a sympathetic restoration - remove the stains with alcohol and toothbrush as much as you can, then apply a light shellac polish to seal it, cut back the gloss level then wax to match the rest of the cabinet.
The finish on mine was virtually all gone anyway, so I had no choice but to remove what was left of it and do it all again. For colouring I used a wash coat of baker's ammonia powder dissolved in water, oiled lightly with BLO, then build and grain fill with orange shellac. For the carved detail a sable brush worked best. This gave a very rich warm natural walnut brown similar to the woodgrain bar things at the top of each post in this forum .