Results 1 to 1 of 1
Thread: Jarrah Floorboards Prep-work
-
1st September 2009, 04:00 AM #1
Jarrah Floorboards Prep-work
Im currently ripping up the evil vinyl thats covering my beautiful jarrah floorboards and need some advice.
After punching the nails in can I use a "Wax Stick" to fill the holes - keeping in mind I want to use Tung Oil on it after sanding.
And what can i do to clean up the excess glue and muck before sanding ? or do I just give it a once over with a coarse grain sandpaper? (Im going to use a PolyVac when I get to that.)
I've never done this before so any advice would be helpful
Read the full thread at RenovateForum.com...
Similar Threads
-
130 mm recycled jarrah floorboards
By Reno RSS Feed in forum FLOORINGReplies: 0Last Post: 11th April 2009, 06:10 PM -
What prep work to do for re-painting room with VJ walls/ceilings
By mcmahong in forum PAINTINGReplies: 0Last Post: 27th April 2008, 01:38 PM -
Jarrah Floorboards
By synegy22 in forum FINISHINGReplies: 4Last Post: 3rd June 2005, 09:54 PM -
Jarrah Floorboards
By synegy22 in forum FLOORINGReplies: 6Last Post: 24th May 2005, 09:34 AM
Bookmarks