![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Cutting studs for 40mm piping
-
26th August 2009, 10:00 PM #1
Cutting studs for 40mm piping
Hi, newbie to this site.
I have built a new partition wall internally using 90mm x 35mm studs. The studs are set at 400mm apart. The wall is 1400mm wide. I intend to hide the 40mm PVC pipe by installing within the wall.
Question: I will need to cut approx 45mm out of the stud.
Will that weaken the studs?
Excuse my terminology - I have alot to learn.
Read the full thread at RenovateForum.com...
Similar Threads
-
Best Paint For PVC Piping?
By Metal Head in forum PAINTINGReplies: 5Last Post: 24th July 2006, 03:33 PM -
clear PVC piping
By TK1 in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 7Last Post: 18th August 2005, 10:04 AM