Results 1 to 8 of 8
  1. #1
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default Open Office Writer Problems

    Open Office Writer Problems
    I'm updating the Wombat Sawmill Plans which is frustratingly difficult because of ongoing problems with open office writer.

    Occasionally while I'm scrolling up or down a page by putting the cursor on the up or down arrow in the vertical sidebar the scrolling takes off automatically and it will scroll to the end of the document. As it takes about 7 seconds to scroll each page and there are some 80 pages it takes some time for the auto scrolling to finish. Its a real pita.

    I insert graphics into the document by pasting from the clipboard as its the only way I can transfer graphics into writer from my cad program.

    Some graphics are small and mixed in with text.
    These small graphics move with the text if I insert more text above them, including inserting new page. I regard this as normal.

    However the large graphics which take up a full page do not move if I add more text above them. If I insert a new page (ctrl/enter) it turns up below the large graphics and I must move each large graphic by cutting and pasting into the desired location.

    I couldn't make sense of the OO master document systemn as it doesn't seem to work with included graphics.

    I thought of writing each section as a separate document, but this does not work as Select All only selects text and doesn't select included graphics. So I cannot cut and paste chapters into a complete document

    If I wish to insert another page of info in the document it currently means I have to manually edit every following page manually to keep all the information in the correct relationship with the graphics.

    I just realised this latest revision which has taken almost a week to do is done in A4 page setup whereas I should have done it in US Letter format so I may have wasted an entire week doing an Inch version of my existing Metric plans.

    Looking for suggestions
    Regards, Bob Thomas

    www.wombatsawmill.com

  2. #2
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    0

    Default

    Bob over the years the scrolling mouse problem has popped up for me in Word, Wordperfect , Web pages, e-mail programs

    Check the setting of your mouse through its own software or Control panel settings

    Similar with including graphics as above programs sorry not used Open Office as yet

  3. #3
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    I was advised in another forum that it is a windows problem and the fix for it.
    So I've done as advised its now wait and see.
    Regards, Bob Thomas

    www.wombatsawmill.com

  4. #4
    Join Date
    Apr 2005
    Location
    Queensland, Aus
    Age
    72
    Posts
    97

    Default

    Bob,
    Don't know what your setup is but if you have a laptop with one of touchy-feely mouse pads you will find that it sometimes interferes with your desktop mouse.

    You can try disabling it in the Control Panel but I've found that the best way to resolve this problem in my situation was just to run my finger over the pad to get the mouse to respond and the problem goes away ( till next time ...which might be hours or days away)

    Can't help you with your graphics problems though

    Ian

  5. #5
    Join Date
    Dec 2008
    Location
    Eastern Australia
    Posts
    60

    Default

    I get the odd funny thing with word where if you say you spell a word incorrectly etc, you cant take your curser and make a space. If you spell groove say and in error put grove, if you try to add the o it writes on top of the V. That isses me right poff.

  6. #6
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    Here's my 10 cents worth...

    Don't use word processing packages (Word, Open Office, whatever) for doing page layout. It's like teaching a pig to sing - not only does it annoy the pig, it's ultimately an exercise in frustration.

    The open source/free alternative to desktop publishing packages like InDesign is Scribus - you can download it here - http://www.scribus.net/

    Yes, a windows version is available. It's worth taking the time to learn it - it's quicker than trying to get nice layouts in word processing software, especially for long and complicated documents, and it will make printing it a lot more fun.

    If you are using the clipboard to get images out of a CAD program, you'll probably find that they will be low (72 dpi) resolution; if possible, export them from the CAD package (as an eps or pdf file) as this will keep it as a vector image which doesn't have resolution limitations.

  7. #7
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    Quote Originally Posted by Master Splinter View Post
    Here's my 10 cents worth...

    Don't use word processing packages (Word, Open Office, whatever) for doing page layout. It's like teaching a pig to sing - not only does it annoy the pig, it's ultimately an exercise in frustration.
    absolutely


    If you are using the clipboard to get images out of a CAD program, you'll probably find that they will be low (72 dpi) resolution; if possible, export them from the CAD package (as an eps or pdf file) as this will keep it as a vector image which doesn't have resolution limitations.

    my clipped images are vector images.
    Thank you for the advice, I'll try scribus and hope it isn't another exercise in futility
    Regards, Bob Thomas

    www.wombatsawmill.com

  8. #8
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    For a frustration free experience, I'd actually recommend Adobe InDesign CS4 - a delight to work with, but it'll cost you in the region of $1,200 - $2,000...

Similar Threads

  1. Problems with Open Slather- et al
    By Dennis Millard in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACK
    Replies: 8
    Last Post: 29th December 2008, 10:56 PM
  2. Out of the Office
    By Ozkaban in forum JOKES
    Replies: 3
    Last Post: 21st August 2008, 12:01 AM
  3. A bad day at the office!
    By Tikki in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 7
    Last Post: 26th June 2005, 08:43 AM
  4. War Office
    By LineLefty in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 6
    Last Post: 18th June 2004, 06:05 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •