![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 15 of 19
Thread: Krebs Spray Equipment
-
9th July 2004, 12:52 PM #1
Member
- Join Date
- Jun 2004
- Location
- Melbourne
- Age
- 73
- Posts
- 0
Krebs Spray Equipment
I am looking for an economical solution to painting doors with enamel and achieving a pro finish.
After some research I believe an airless spray gun can achieve very good results with minimum overspray and provide versatility in being able to spray undercoats, finishing coats and laquers.
Has anyone used Swiss Krebs Airless equipment - which I understand is a good entry level solution?
<!-- / message -->
-
10th July 2004, 12:27 AM #2
Krebs are very good as are Wagner but don't buy the cheap ones they have a small bore on the piston and won't move anything too viscous, buying the slightly more expensive ones will give you a bigger bore and the ability to suck almost anything in and spit it out the nozzle.
The Krebs 45 is about the best value for money in an airless spray gun and works pretty well. Don't get anything less than a 200 in Wagner.
Hope this is of some help.
Cheers - Neil
PS The cheapest entry level, low pressure spray guns, that work really well, are the one that used to come with the old Electrolux vacuum cleaners. There are thousands of them around in 2nd hand shops and at markets etc and they cost only a few cents. Team one up with a cheap 2nd hand vacuum cleaner that blows and you can have a pretty good spray system for well under $50. :eek:
-
19th July 2004, 11:50 AM #3
Member
- Join Date
- Jun 2004
- Location
- Melbourne
- Age
- 73
- Posts
- 0
Krebs 45
Neil,
thanks for the "heads up" I've bitten the bullet and bought the more expensive KREBS 45 kit @ $330.00 and a couple of fine nozzles for spraying enamel paint. Happy to provide feedback once I've had a chance to use the gun. Looks very well made and came with a few useful accessories.
-
29th October 2004, 02:48 PM #4
Member
- Join Date
- Jun 2004
- Location
- Melbourne
- Age
- 73
- Posts
- 0
Krebs 45 UPdate
Thge krebs gun has been finally put to use and I can say it works exremely well. Having a number of louvered doors to paint I was astonished how quickly you can finish 5 doors - and obtain a superb finish.
I bought the 412T kit which provides a few extras like a viscosity checker (important) filter and spare nozzle.
I am currently using acrylic paint and yet to try oil based - but expect an even better finish! You need to buy the optional smaller spray nozzles for oil.
Top marks for a top gun!
-
29th October 2004, 03:01 PM #5
Warmtone, thanks for taking the time to let us know how it went. Where did you get your system?
Great minds discuss ideas,
average minds discuss events,
small minds discuss people
-
29th October 2004, 09:48 PM #6
Originally Posted by Neil
Graeme
-
3rd November 2004, 02:17 PM #7
Member
- Join Date
- Sep 2002
- Location
- Central Victoria, Australia
- Posts
- 21
Hi Graeme
Any chance of getting a pic of one of the Vactric units so I know what to look for?
I bought a Wagner 140 thinking I could spray stains/clears on but I have only used it on scraps and it comes out looking like s**t. I would hate to have spent hours sanding etc and then ruin it using this system.
I think it will be put in the evergrowing "things that should not have been bought" pile or it might just make it to the "it seemed a good idea at the time department.
Ash
-
3rd November 2004, 09:16 PM #8
Ash,
I will get out the camera over the weekend. Vactric have been out of business for over 40 years to my knowledge. CIG made a unit called (I think) 'easysprayer' or something like that but with the blower - I nearly called it a compressor - in a housing which sits on the floor rather than a barrel that you sling on your back.
Graeme
-
4th November 2004, 03:00 AM #9
GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 42
A friend had/has one (haven't seen him for yonks - since he moved) - it was a 'Beaver' with some other sound bite tacked on before or after - Easy-Beaver??? It all coiled up with the spraygun fitting into a socket in the housing
-
5th November 2004, 12:03 AM #10
Pretty sure that the smaller unit CIG made, which had a corrugated hose and ran off a blower was called the "Little Beaver". There was also a larger unit which ran off a small oilless compressor called the "Big Beaver".
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
7th November 2004, 10:08 PM #11
Originally Posted by AshleyM
-
8th November 2004, 08:41 AM #12
Member
- Join Date
- Sep 2002
- Location
- Central Victoria, Australia
- Posts
- 21
Thanks for the pic Graeme. I don't think I have ever seen such a unit.
I started to stain my latest project over the weekend and I could have done with one of those. After spending the usual hours in completing the construction I put the first coat of stain on and it looked s@#t-house. Damn I hate fininshing a project.
There has to be an easier way. It's a real pain in the butt when fininshing a project has you questioning whether to bother woodworking at all.
I will have a look around for one of these units (or similar) and see whether I can get back my will to create sawdust.
Ash
-
19th November 2004, 03:30 PM #13
Member
- Join Date
- Jun 2004
- Location
- Melbourne
- Age
- 73
- Posts
- 0
Krebs Dealer Location
Dave in 0z
The Krebs equipment was purchased from JustTools in Clarenden St South Melbourne.
-
7th December 2004, 12:59 AM #14
Why not just buy a automotive spray gun like a Sampson S90?(around $150)
You only need about 20-25psi(constant)so one of those elcheapo $99 air compressors will do the job easy.
This will provide far better finish because these guns atomise the paint much finer than those silly airless units and eager beavers.
If you dont believe me go outside and look at your car then look at a eager beavered fence!
-
7th December 2004, 11:50 PM #15
Originally Posted by Harry72
Mate, the "eager beaver" is a chainsaw....
I'm sure it'd put a good sort of a 'finish' on a fence.
I have mentioned in other posts in this forum that I have one of those reverse vacuum cleaner guns, it's the the CIG 'little bever' & it's great for water based paint on cane lounges, speaker boxes &, most likely, fences BUT, while it is low pressure, it is VERY high volume & the overspray goes bludy everywhere.
I'm looking for something that will put a good finish on a smallish bit of wood, IE turned item, without painting everyotherthing else in the shed/driveway/paddock at the same time.Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.