My quandry........I have nearly finished building a garden shed (3 sides against my brick wall).
It's been a sorta build as you go project with only rough plans in my head. At the entrance it has a full head height door and to get a reasonable slope on the roof it goes right up tight under the eaves. It's come up pretty good and I thought I'd finish it off with a fascia board and gutter.
Measured up the fascia length and then realised that the swing of the outward opening door would hit the fascia. (see above notes about no plans :o) I have about 90mm max to play with, take into account the gutter slope and it will probably come back to about 80mm.

Not much rain will come off the small roof, is there such an animal as a 80mm gutter????
Any recommendations or alternatives (maybe get a 150mm pipe and cut in half?)

Take no notice of any spans, timber sizes or legalities

..........thanks

Attached Thumbnails



Read the full thread at RenovateForum.com...