



Results 1 to 4 of 4
Thread: What finish should I try?
-
17th December 2002, 01:27 PM #1
What finish should I try?
My early bookcases were finished with polyurethane. But all my later projects have been finished with Danish Oil.
My current project is a small apothecary cabinet type thing, which will be used regularly, and will be on my desk. Made of tassie oak, with jarrah on the drawer fronts.
I would appreciate some suggestions what is a good finish to experiment with next.
I am considering trying a shellac finish. How about some sort of laquer (what and where do you get laquer?).
I am usually impatient to get the project inside and used, but I am prepared to spend some time doing a finish. I'm not intersted in French polish. I do have Neil's Polishers Handbook.
Regards
Sandra
-
17th December 2002, 07:38 PM #2
if you have Neils book, then close your eyes, flick through the pages and stop when your happy and try what ever is on that page...
Cheers!
-
18th December 2002, 11:47 AM #3
AAGGGHH! I landed on the decorative gesso finish!
-
18th December 2002, 07:21 PM #4
Hahahah.... Oh well, give it a go and see what happens. Its actually quite fun...
Bookmarks