



Results 1 to 2 of 2
Thread: Hebel block planter boxes
-
20th December 2007, 10:02 AM #1
Hebel block planter boxes
Hi All,
I need to make a couple of largish planter boxes to fill/hide a wooden retaining wall along the neighbours fence. I will be planting a couple of bouganvilliers in them and train them along the fence. They can only be about 400mm wide and up to 1200mm long. If you look at the photo, I want to put them behind the water feature wall on top the rock retaining wall to hide the wooden fence/wooden retaining wall.
Would hebel be ok for this or do i need to use something stronger.
Cheers
Michael.
-
20th December 2007, 08:30 PM #2
I'd give it a crack. However - I'd pour a small slab to put them on, and pin the joints with stainless or gal screws as dowels and two-part construction resin like Anchor-Fix. Then waterproof the inside with a cheap brushable membrane like Bitcote #3. Don't forget adequate weepholes!
Cheers, Adam.
Similar Threads
-
Hebel & Besser
By mcmurphy in forum BRICKWORK, CONCRETING, PAVING, RENDERING, etcReplies: 3Last Post: 25th April 2007, 09:40 AM
Bookmarks