Hi

Well we decided to go with flatpax style kitchens.

One issue is that the ceiling where the pantry and some other cupboards will go are straight for 2000mm then angle inwards at the roof pitch of about 22 deg. This means that a section (or wedge) will need to be cut out of the back top of each of them.

See pics;

Pic 1. std pantry,
Attachment 75306

Pic 2. Pantry showing wedge out of back,
Attachment 75305

How would you do this?

I have a circular saw but no Tablesaw at the moment and would rather do it when assembled.

cheers

dazzler

Attached Thumbnails



Read the full thread at RenovateForum.com...