



Results 1 to 2 of 2
Thread: Installing undermount sink
-
3rd December 2006, 10:28 AM #1
Installing undermount sink
We have just had our new kitchen installed...Caesarstone benchtop went in last week. We now need to install the undermount sink...
We have been advised that silicon will bond and seal the sink no problems. So we put silicon along the top edge of the sink and press it up against the underside of the benchtop.
The instructions also say to use a 'high strength epoxy compound' as well...can anyone explain what a high strength epoxy compound is and specifically, what brands would be the best to use?
Thanks.
-
3rd December 2006, 10:40 AM #2
benchtop already in is a little less than ideal. The silicon can hold it by itself after curing, but you will have to provide some clamping - usually its installed by the benchtop company, who install upside down with a bag of cement on the sink - if you cant get clamps in, then a jack of some sort providing upward pressure on the sink to push it against the ceaserstone.
As to epoxy, what these do is give you a time advanatge, ie a 2 part will set in 30 minutes and set hard in 24 hrs. Not really any different to araldite but just in bigger packaging.
The company ioi got my benchtop from offered to give me a little 2 part for the job, but I already had some 2 part concresive (a concret crack repair 2 part). Any decent building sup[ply can help with a 2 part epoxy.
Similar Threads
-
Installing a door frame before hanging a door
By Hybrid in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 18Last Post: 9th January 2007, 08:31 AM -
House renovation - new external sink to sewer
By Scan_Fan in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 3Last Post: 7th November 2006, 09:26 PM -
Installing Kitchen Sink
By blt in forum KITCHENSReplies: 6Last Post: 14th August 2005, 03:57 PM -
All but the kitchen sink
By marineman in forum KITCHENSReplies: 16Last Post: 5th February 2005, 04:22 PM
Bookmarks