Results 1 to 9 of 9
  1. #1
    Join Date
    Nov 2023
    Location
    melb
    Posts
    18

    Default Repairing rotten windows

    Seems everything I look at in this holiday house has rotted. This window frame is cedar but the front part was completely crumbly so I cut it off and was planning to simply screw another piece on front, after putting some wood hardener in the gaps and filling with bog.

    Open to other suggestions, I have just replaced the weatherboards and don’t want to pull the windows out and I don’t think it’s feasible to replace the whole bottom piece?

    The last photo is of one of the windows that doesn’t have much rot, for context.

    5CDCE3A0-0598-44B6-B337-914FFC1F495D.jpeg
    CC67EDC7-AA9F-453D-88AA-DF69A279F318.jpeg
    D4E5112D-070F-48A0-A261-8A14A229E82C.jpeg
    C06FE3BF-F871-413D-92AA-B227C4FE394D.jpeg
    DFC81C7D-B3AB-4914-8090-67B640DE17A6.jpeg
    C8B13DC6-5A56-4622-95F1-98404504C867.jpeg
    Attached Images Attached Images

  2. #2
    Join Date
    Sep 2005
    Location
    Bendigo
    Age
    60
    Posts
    229

    Default

    Sorry to say but it looks like it has gone too far and complete replacement of the bottom sill is the only option in my opinion.

  3. #3
    Join Date
    Nov 2023
    Location
    melb
    Posts
    18

    Default

    Quote Originally Posted by droog View Post
    Sorry to say but it looks like it has gone too far and complete replacement of the bottom sill is the only option in my opinion.
    Do you think it’s feasible to do that without removing the full window, eg just taking out the two bottom glass panels?

  4. #4
    Join Date
    Sep 2005
    Location
    Bendigo
    Age
    60
    Posts
    229

    Default

    Quote Originally Posted by kevviek View Post
    Do you think it’s feasible to do that without removing the full window, eg just taking out the two bottom glass panels?
    Without first hand examination it’s impossible to say, but may be possible depending on construction.

  5. #5
    Join Date
    Nov 2004
    Location
    Redlands area, Brisbane
    Posts
    93

    Default

    Quote Originally Posted by kevviek View Post
    Do you think it’s feasible to do that without removing the full window, eg just taking out the two bottom glass panels?
    Probably.

    I have had to make this exact same repair, on multiple windows on a previous house. I also had to replace the bottom 30cm of the sides on a couple of the windows, and this was on the top story of that house. At least you are nearly at ground level.

    I don't have any photos though. This was pre-digital photography.

  6. #6
    Join Date
    Oct 2010
    Location
    Victoria, Australia
    Posts
    18

    Default

    Window needs to come out so the frame can be rebuilt. There's no way you can replace the sill properly without removing the whole window frame. It'd be easier just to get new windows fitted. All this should have done before doing the weatherboards.

  7. #7
    Join Date
    Jun 2023
    Location
    Sydney, NSW
    Age
    71
    Posts
    12

    Default

    I agree with the above. At least one of the images looks like dry rot also. Trying a bodge repair on this is throwing money away, no amount of bog or chiselling will remedy this. Replace them.

  8. #8
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    75
    Posts
    9,667

    Default

    Fully agree with the 2 previous posts. I'd be very hesitant to try a botch job which could end up later on being more costly than replacing the whole window.

  9. #9
    Join Date
    Aug 2004
    Location
    Brisbane
    Posts
    777

    Default

    Another vote for replacement

Similar Threads

  1. Rotten so & so.
    By issatree in forum JOKES
    Replies: 6
    Last Post: 6th August 2013, 07:49 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •